This PR adds a feature to merc2 to update vertices. This will be needed
to efficient do effects like blerc/ripple/texture scroll. It's enabled
for blerc in jak 1 and jak 2, but with a few disclaimers:
- currently we still use the mips2c blerc implementation, which is slow
and has some "jittering" because of integer precision. When porting to
PC, there was an additional synchronization problem because blerc
overwrites the merc data as its being read by the renderers. I _think_
this wasn't an issue on PS2 because the blerc dma is higher priority
than the VIF1 DMA, but I'm not certain. Either way, I had to add a mutex
for this on PC to avoid very slight flickering/gaps. This isn't ideal
for performance, but still beats generic by a significant amount in
every place I tested. If you see merc taking 2ms to draw, it is likely
because it is stuck waiting on blerc to finish. This will go away once
blerc itself is ported to C++.
- in jak 1, we end up using generic in some cases where we could use
merc. In particular maia in village3 hut. This will be fixed later once
we can use merc in more places. I don't want to mess with the
merc/generic selection logic when we're hopefully going to get rid of it
soon.
- There is no support for ripple or texture scroll. These use generic on
jak 1, and remain broken on jak 2.
- Like with `emerc`, jak 1 has a toggle to go back to the old behavior
`*blerc-hack*`.
- In most cases, toggling this causes no visual differences. One
exception is Gol's teeth. I believe this is caused by texture coordinate
rounding issues, where generic has an additional float -> int -> float
compared to PC merc. It is very hard to notice so I'm not going to worry
about it.
When I cleaned up the `game.gp` some DGOs were no longer referenced
because my first dependency script omitted them -- thinking they weren't
required. From the perspective of the source files they indeed weren't
required but we still have to produce the DGO file.
also works around #2177
This adds environment mapping support to `Merc2`, and turns it on for
Jak 1 and Jak 2.
- The performance is much better
- Jak 1 can be toggled back to the old behavior with `(set! *emerc-hack*
#f)`. The new environment mapping is identical to the old one everywhere
I checked.
- Jak 1 still falls back to generic for ripple/texscroll/blerc/eyes -
there's still no dynamic texture or vertex updating support. The eye
detection stuff will sometimes flag stuff as eyes which is not eyes,
which is fine, but means that generic will be used in some places where
emerc could be used. For example, the shiny plates on jak's arm will be
drawn with generic because jak has eyes.
- Jak 2 hasn't been checked super carefully against PCSX2 yet.
- Jak 2 still isn't technically using emerc, but instead putting emerc
models in the merc bucket.
- The interface to merc is a lot different now and totally custom
OpenGOAL DMA code. The original merc drawing asm doesn't run anymore.
- The FR3 format changed
- Something funky going on with foreground lighting in escape, but
doesn't seem to be related to this change?
Performance comparison, jak 1, in likely the most generic-merc heavy
spot:
Some more progress on vehicle code, the following files still remain:
- vehicle-guard (annoying stack types)
- traffic-engine (many issues, some which already have issues made for
them, other entirely new confusing things!)
Initial implementation of the `ocean-mid`, `ocean-far` and `ocean-near`
renderers for Jak 2.
There's still a few things to sort out, mainly:
- [x] ~Backwards compatibility with Jak 1. The only thing that currently
stands in the way of that is figuring out a clean way to "un-hardcode"
the texture base pointer in C++ without creating a completely separate
`OceanTexture` class for Jak 2. One thing I thought of would be
modifying `BucketRenderer`'s virtual `init_textures` method to also pass
the `GameVersion`, but I'm not sure if there's a better way.~
- [x] ~The sudden transition from `ocean-near` to `ocean-mid`. Not sure
why it's happening or how to fix it.~
- [x] The ocean has two new methods in Jak 2, `ocean::89` and
`ocean::79`, one of which seems to be related to time of day sky colors.
~Even without them implemented, the end result looks quite close, so we
may be able to skip them?~ `ocean::89` generates `ocean-mid` envmap
textures, so it will likely be required, but will not be handled right
now.
Reverted the VU prologue removals because it made the tests fail.
Some side missions require cars, they don't work yet. Also the
ring-races and collection ones do not grant orbs. The hoaming beacon
collection one causes a `hud` crash
Adding support for better child-type method docstrings. This is a
problem unique to methods.
Usually, a child-type will have the same signature and a common name
will apply, but the implementation is different. This means, you
probably want a different docstring to describe what is happening.
Currently this is possible to do via `:replace`. The problem with
replace is two fold:
- a replaced method ends up in the generated `deftype`...because you
usually change the signature!
- we don't put docstrings in the `deftype` in normal GOAL, this is just
something we do for the `all-types` file (they go in the `defmethod`
instead)
- more importantly, this means anytime you now want to change the
parent's name/args/return type -- you have to apply that change
everywhere.
So this is a better design you can now just declare the method like so:
```clj
(:override-doc "my new docstring" <method_id>)
```
And internally a pseudo-replaced method will be added, but it will
inherit everything from the parent (except the docstring of course)
Unrelated - I also made all the keyword args for declaring methods not
depend on ordering
This also adds support for documenting virtual and non-virtual state
handlers. For example:
```clj
(:states
(part-tester-idle (:event "test") symbol))
```
or
```clj
(idle () _type_ :state (:event "test") 20)
```
I will probably add the ability to give some sort of over-view docstring
at a later date.
Co-authored-by: water <awaterford111445@gmail.com>
- started documenting the files I glossed over, some are totally done,
others are just partially done
- I changed the decompiler to automatically initialize the
art-group-info from the json file. This makes updating gsrc, even a
single file at a time, have consistent naming
- Though I disabled this functionality for jak 1, as I have no idea if
using the ntsc art groups will cause a regression for different versions
- fix indentation for docstrings -- it still doesn't look great, but
this is now a formatting concern, rather than the docstring having a
bunch of happen-stance leading whitespace.
- make sure bsp is processed on `l` levels in extraction (caused missing
remaps)
- clean up a few prints in extraction
- handle the <15 byte differences in art group files automatically (no
more errors about file naming)
- fix potential exception thrown by merc2 in a few ways: fixed bad data
in FR3's, check texture index just in case, and handle exceptions a
little bit better (still a crash, but at least you get a print)
- fix mips2 ocean stuff causing ocean far crashes
`whack` is missing a single function (`birth-func-whack-score`) that I
couldn't figure out the right args for.
I was not able to test any of this code because I cannot get `atoll` to
extract.
Manual patches in:
- `tomb-boulder`: a few `ppointer->handle`s (I think) were not being
decompiled properly (all used in combination with `clone-anim-once`)
- `ruins-obs`, `pillar-collapse`: `art-joint-anim` casts
- `tomb-beetle`: commented out a call to `shadow-control-method-14` that
was crashing the game when spawning the beetles
- `grunt-mech`: commented out `(.mula.s)` instruction
Notes:
- `enemy-info`'s `idle-anim-script` is most likely a `(pointer
idle-control-frame)`, however, some `nav-enemy-info` labels set it to
`#f` (first encountered in `tomb-beetle`, but also present in `hal`,
`roboguard` and `metalkor-setup`), which crashes the decompiler. This
may become a problem in the future when we eventually get to these
files. For this PR, I made `tomb-beetle` decompile with
`idle-anim-script` set to `#f` and have not noticed any issues/crashes
with that.
- `tomb-boulder` compiles and doesn't crash, but when trying to play the
Daxter chase sequence, the boulder sometimes either spawns at the origin
or spawns in the correct place, but doesn't move.
Co-authored-by: water <awaterford111445@gmail.com>
- worked around audio code for gungame, the tutorials now function
- auto-exit cutscenes upon entry. This doesn't always work nicely (i
didnt want to cause any side-effects due to messing with load states)
but it atleast stops jak from being stuck forever waiting for the
cutscene to load
Effects the following files:
- [x] vehicle-rider
- [x] vehicle-control
- [x] vehicle-effects
- [x] vehicle
~~- [ ] vehicle-util~~
- [x] vehicle-physics
- [x] vehicle-states
~~- [ ] vehicle-guard~~
~~- [ ] traffic-engine~~
~~- [ ] traffic-manager~~
With the exception of traffic-engine, most of these files are either
done or have 1-3 stubborn functions remaining. Draft while I try to
resolve as many as possible / cleanup names and such.
Co-authored-by: water <awaterford111445@gmail.com>
Adds the following files:
- `amphibian`
- `centurion`
- `ginsu`
- `grenadier`
- `hopper`
- `metalmonk`
- `monster-frog`
- `predator-graph`
- `predator-h`
- `predator`
- `rapid-gunner`
- `rhino`
- `rhino-wall`
- `tomb-baby-spider`
Also adds the DGOs for the following levels:
- Mar's Tomb
- Mountain Temple
- Drill Platform
- Sacred Site (Sage Hut)
Manual patches:
- The decompiler emits `(b! #t cfg-17)` in `(trans hostile hopper)`
without putting a `(label cfg-17)` anywhere
- Added cast to `art-joint-anim` in `(code broken rhino-wall)` and
`(code hit rhino-wall)`
Other notes:
- `amphibian` seems to occasionally crash when using its tongue attack.
Haven't investigated this yet
- `ginsu` crashes after being killed somewhere in the `deactivate`
method, possibly because of its `part-spawner`
- Predators aren't spawning in the forest hunt mission, not sure if
`forest-obs` might be needed for that or if it's something else
- The `rhino-wall` STR animation seems to load (albeit a bit broken due
to missing VAG stream playback), but causes the viewport to shrink as
soon as it's played
- I added `pegasus::74` to the `event_handler_hack` bool in
`variable_naming.cpp` because I got a `none` cast after changing the
return value of `enemy::74`
Notable things:
- This assert is hit when trying to save the pc-settings file, NYI
e630b50690/game/kernel/common/Symbol4.h (L14)
so right now settings aren't persisted. But RPC defaults to on
- The existing functions can probably be made generic based off the game
version, but I didn't spend time refactoring them yet as they aren't
really ready to be used in jak 2 yet (we have no screenshots for the
levels for example)
The things that aren't working right now:
- returning the board (maybe cutscene related?)
- draft until i see if this can be sorted out
- seems to need streaming audio as well, the `scene-player` gets
properly initialized from what i can tell
- had to hack around the streaming audio parts.
Everything relating to IK in `target-mech` was commented out as I
couldn't get a lambda to decompile properly, but the mech still seems to
work fine without it.
Co-authored-by: water <awaterford111445@gmail.com>
Fixes:
- a very old bug in depth in DirectRenderer, probably from the original
tfrag stuff. Looked at PCSX2 source code to see how 32/24 bit depths are
handled. This fixes hud sprites being drawn behind level geometry.
- saturate `vftoi4` like the ps2 does when the float is too large,
fixing hidden text in `hud`. For now it's only using this in the font
code because this saturation is actually kinda slow and hasn't been a
problem in other places.
- fix crazy particle spawning issue with blue gun and dripping stuff.
This would happen if particles kill themselves while being processed
(through a callback)
This adds a new ImGUI menu to help filter out the clutter on screen.
https://user-images.githubusercontent.com/13153231/210192912-b1c28319-bacb-449c-ad7f-e7308fb75f50.mp4
This also:
- moves the imgui display bool into a game specific config file (you can
hide it in jak1, and not in jak2)
- the config file also persists the settings from this menu (except the
filters for now, future TODO)
- there is a new `ignore_imgui_hide_keybind` in this file to ignore
hiding it when you press Alt
