The progress menu loads its icon textures from a .STR file that we were
previously ignoring.
This change:
- updates the decompiler so it can process a .STR file containing a
texture
- adds a feature to force an entire page to always be loaded in the PC
renderer by putting all textures in the GAME.FR3 file.
- regenerates the texture offset map file for jak 2 with these new
textures
For now, I've just put the icon textures in GAME.FR3. The downside is
that these will always stay on the GPU, using up VRAM even when they
aren't needed. But the entire GAME.FR3 file is under 3 MB so I think
it's ok.
Added framework to do texture animations entirely in C++. Currently only
works on relatively simple ones, and doesn't handle updating all
parameters - only the speeds.
Connected texture animations to merc and tfrag for skull gems, dark
bomb, and scrolling conveyors.
Cleaned up Tfragment/Tfrag3, which used to be two classes. This was one
of the first C++ renderers, so it had a weird design.
Trying to make up for some of the startup speed lost in the SDL
transition. This saves about 1s from start (from ~3s), and about 500 MB
of RAM.
- Faster TIE unpack by merging matrix groups, more efficient vertex
transforms, and skipping normal transforms on groups with no normals.
- Refactor generic merc and merc to use a single renderer with multiple
interfaces, rather than many renderers. Removed "LightningRenderer" as a
special thing, but Warp is still special
- Add more profiling stuff to startup and the loader.
- Remove `SDL_INIT_HAPTIC` - this turned out to be needed for
force-feedback steering wheels, and not needed for controller vibration
- Switched `vag-player` to use quicksort instead of the default GOAL
sort (very slow)
This moves the blerc math from mips2c to the Merc2 renderer, and uses
floats instead.
We could potentially do this on the GPU, which would be even faster, but
this isn't that slow in the first place.
Doesn't actually do anything in Jak 2 because the collide mesh isn't
extracted, but the functionality is all there. Also updated the renderer
a bit to keep the colors more readable.
- decompile `neon-baron-part`, which also has the hideout door for some
reason
- improve a few error messages in static data decompilation
- fix bug with disabling fog in merc
- better handling of the `disable-fog` settings for merc, should fix the
spotlights. There's a setting in the merc effect, and also a runtime
flag for the draw-control. I'm not actually sure what reads these, but
the draw-control one is definitely used to disable fog on the
spotlights.
- increase merc draw limit to try to fix the issue about partially drawn
citizens in the city
- remove useless debug prints (it's okay to die in init, and the medium
load buffer size mode is understood now)
Fixes some mistakes with merc draw modes. The glass in the palace level
no longer writes to the depth buffer (it's "water"):
Also fixes the one-frame flickers when level draw orders change. We
might be able to make this more efficient in the future, but this will
at least fix the frame with nothing drawn.
Definitely needs a clean up pass, but I think the functionality is very
close.
There's a few "hacks" still:
- I am using the emerc logic for environment mapping, which doesn't care
about the length of the normals. I can't figure out how the normal
scaling worked in etie. I want to do a little bit more experimentation
with this before merging.
- There is some part about adgifs for TIE and ETIE that I don't
understand. The clearly correct behavior of TIE/ETIE is that the alpha
settings from the adgif shader are overwritten by the settings from the
renderer. But I can't figure out how this happens in all cases.
- Fade out is completely disabled. I think this is fine because the
performance difference isn't bad. But if you are comparing screenshots
with PCSX2, it will make things look a tiny bit different.
Three main changes:
- Adds support for the texture scrolling effect used on conveyor belts,
and turn it on for jak 2.
- Use merc instead of generic in jak 1 for ripple/water/texscroll stuff
(non-ocean water, lava, dark eco, etc). This is a pretty big speedup in
a lot of places.
- Fix a really old bug with blending mode used to draw environment maps.
The effect is that envmaps were half as bright as they should have been.
As usual, there's a flag to go back to the old behavior on jak 1. Set
these to `#t` to use generic like we used to.
```
*texscroll-force-generic*
*ripple-force-generic*
```
The format has changed, and everything must be rebuilt (C++, FR3's, GOAL
code)
Support rendering eyes with merc for both jak 1 and jak 2.
For jak 1, everything should look the same, but merc will be used to
draw eyes. This means that jak is now fully drawn with merc!
For jak 2, eyes should draw, but there are still a few issues:
- the tbp/clut ptr trick is used a lot for these eye textures, so
there's a lot that use the wrong texture
- I had to enable a bunch more "texture uploads" (basically emulating
the ps2 texture system) in order to get the eyes to upload. It would be
much better if the eye renderer could somehow grab the texture from the
merc model info, skipping the vram addressing stuff entirely. I plan to
return to this.
- I disabled some sky draws in `sky-tng`. After turning on pris2
uploads, the sky flashed in a really annoying way.
This PR adds a feature to merc2 to update vertices. This will be needed
to efficient do effects like blerc/ripple/texture scroll. It's enabled
for blerc in jak 1 and jak 2, but with a few disclaimers:
- currently we still use the mips2c blerc implementation, which is slow
and has some "jittering" because of integer precision. When porting to
PC, there was an additional synchronization problem because blerc
overwrites the merc data as its being read by the renderers. I _think_
this wasn't an issue on PS2 because the blerc dma is higher priority
than the VIF1 DMA, but I'm not certain. Either way, I had to add a mutex
for this on PC to avoid very slight flickering/gaps. This isn't ideal
for performance, but still beats generic by a significant amount in
every place I tested. If you see merc taking 2ms to draw, it is likely
because it is stuck waiting on blerc to finish. This will go away once
blerc itself is ported to C++.
- in jak 1, we end up using generic in some cases where we could use
merc. In particular maia in village3 hut. This will be fixed later once
we can use merc in more places. I don't want to mess with the
merc/generic selection logic when we're hopefully going to get rid of it
soon.
- There is no support for ripple or texture scroll. These use generic on
jak 1, and remain broken on jak 2.
- Like with `emerc`, jak 1 has a toggle to go back to the old behavior
`*blerc-hack*`.
- In most cases, toggling this causes no visual differences. One
exception is Gol's teeth. I believe this is caused by texture coordinate
rounding issues, where generic has an additional float -> int -> float
compared to PC merc. It is very hard to notice so I'm not going to worry
about it.
This adds environment mapping support to `Merc2`, and turns it on for
Jak 1 and Jak 2.
- The performance is much better
- Jak 1 can be toggled back to the old behavior with `(set! *emerc-hack*
#f)`. The new environment mapping is identical to the old one everywhere
I checked.
- Jak 1 still falls back to generic for ripple/texscroll/blerc/eyes -
there's still no dynamic texture or vertex updating support. The eye
detection stuff will sometimes flag stuff as eyes which is not eyes,
which is fine, but means that generic will be used in some places where
emerc could be used. For example, the shiny plates on jak's arm will be
drawn with generic because jak has eyes.
- Jak 2 hasn't been checked super carefully against PCSX2 yet.
- Jak 2 still isn't technically using emerc, but instead putting emerc
models in the merc bucket.
- The interface to merc is a lot different now and totally custom
OpenGOAL DMA code. The original merc drawing asm doesn't run anymore.
- The FR3 format changed
- Something funky going on with foreground lighting in escape, but
doesn't seem to be related to this change?
Performance comparison, jak 1, in likely the most generic-merc heavy
spot:
- make sure bsp is processed on `l` levels in extraction (caused missing
remaps)
- clean up a few prints in extraction
- handle the <15 byte differences in art group files automatically (no
more errors about file naming)
- fix potential exception thrown by merc2 in a few ways: fixed bad data
in FR3's, check texture index just in case, and handle exceptions a
little bit better (still a crash, but at least you get a print)
- fix mips2 ocean stuff causing ocean far crashes
`whack` is missing a single function (`birth-func-whack-score`) that I
couldn't figure out the right args for.
I was not able to test any of this code because I cannot get `atoll` to
extract.
Running reference tests/decompiler should now be possible on macos
(arm). Most of the changes were just cleaning up places where we were
sloppy with ifdefs, but there were two interesting ones:
- `Printer.cpp` was updated to not use a recursive function for printing
lists, to avoid stack overflow
- I replaced xxhash with another version of the same library that
supports arm (the one that comes in zstd). The interface is C instead of
C++ but it's not bad to use. I confirmed that the extractor succeeds on
jak 1 iso so it looks like this gives us the same results as the old
library.
Favors the `lg` namespace over `fmt` directly, as this will output the
logs to a file / has log levels.
I also made assertion errors go to a file, this unfortunately means
importing `lg` and hence `fmt` which was attempted to be avoided before.
But I'm not sure how else to do this aspect without re-inventing the
file logging.
We have a lot of commented out prints as well that we should probably
cleanup at some point / switch them to trace level and default to `info`
level.
I noticed the pattern of disabling debug logs behind some boolean,
something to consider cleaning up in the future -- if our logs were more
structured (knowing where they are coming from) then a lot this
boilerplate could be eliminated.
Closes#1358
* extractor: refactor and cleanup for multi-game support
* deps: switch to `ghc::filesystem` as it is utf-8 everywhere by default
* extractor: finally working with unicode
* unicode: fix unicode cli args on windows in all `main` functions
* Remove assets folder, use more std::filesystem
* windows fix
* another one for windows
* another one
* better system for different folders
* rm debugging stuff
* let extractor override everything
* dont revert jak1 change
* wip
* learning about colors
* gltf node stuff working
* cleanup
* support textures
* bvh generation seems reasonable
* tree layout
* frag packer, untested and doesnt do real stripping yet
* temp
* working collide frags
* handle bad inputs better
* clean up
* format
* include
* another include
* reorganize for release build use
* tfrag3 data for merc2
* dma hooks for merc2
* start designing merc2 opengl, seems like the simple approach will be the best here
* before bone packing experiment
* fix up bones.gc
* use uniform buffer
* speedup, fix faces and eyes
* final fixes
* docs for ee merc code
* wip
* more extraction stuff
* partial mat1 working
* mat1
* cleanup
* partial mat2 and mat3 support
* merc extraction seems to work
* [gtie] tie inst and proto functions
* first chain input to generic ee looks good
* m
* works
* ugh
* add tie generic
* rm debug print
* rm generic ties from fr3
