- elec gates now always render at max quality if you have PS2 lods
disabled. the original render distances are so low that the one in
caspad is impossible to see in normal gameplay.
- `fort-entry-gate-11` and `com-airlock-outer-13` are specifically
banned from the all actors hack because they are placed in a bad spot
and Naughty Dog did not program the airlocks very well.
- fixed NPC talk distance being bad for 1 frame.
- fix `sew-scare-grunt` erroneously keeping its spool anim active if you
killed the enemy.
This PR is a combination of
https://github.com/open-goal/jak-project/pull/2507 and some additional
changes to port Shadow VU1 to OpenGL. As far as I can tell, it's
working.
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
Adds sprite distort, fixes buggy sprite rendering in progress, adds
scissoring support (used in various scrolling menus) and a very basic
implementation of `blit-displays`. This is enough to make the fade
effect in the progress menu work, along with all the menus working
properly without needing to use the REPL. This does not make screen
flipping and the filter when failing a mission work.
Added support in the decompiler for detecting `dma-buffer-add-gs-set`
and `dma-buffer-add-gs-set-flusha` and updated all of the Jak 2 code to
use it. Readability improved!
Fixes decompiler issue with `with-dma-buffer-add-bucket` not inlining
forms which broke syntax. Fixes store error warnings showing up for
non-existent stores, there is now a dedicated pass for this at the end.
I started work on making `BITBLTBUF` stuff work in the DirectRenderer,
but stopped for now because it wasn't strictly necessary. It will still
assert like before.
This fixes a long time issue with `lambda`. The `lambda` is a bit
overloaded in OpenGOAL: it's used in the implementation of `let`, and
also to define local anonymous functions.
```
(defmacro let (bindings &rest body)
`((lambda :inline #t ,(apply first bindings) ,@body)
,@(apply second bindings)))
```
```
(defmacro defun (name bindings &rest body)
(let ((docstring ""))
(when (and (> (length body) 1) (string? (first body)))
(set! docstring (first body))
(set! body (cdr body)))
`(define ,name ,docstring (lambda :name ,name ,bindings ,@body))))
```
In the first case of a `let`, a `return` from inside the `let` should
return from the functioning containing the `let`, not the scope of the
`lambda`. In the second case, we should return from the lambda. The way
we told the different between these cases was if the `lambda` was used
"immeidately", in the head of an expression (like it would be for the
`let` macro). But, this falsely triggers when an anonymous function is
used immediately: eg
```
((lambda () (return #f)))
```
should generate and call a real x86 function that returns immediately.
This should fix some death/mission failed stuff in jak 2.
Updates the decompiler for the new format and there's new macros. This
new format should be easier to read/parse.
Also rewrote `sp-init-fields!` (both jak 1 and 2) from assembly to GOAL.
Hopefully I did not miss any regressions in Jak 1/2 while updating the
files, it's a lot.
- [x] compare NTSC-K
- [x] compare NTSC-J
- [x] compare PAL
- [x] figure out version order
- [x] ~~write delta patch for spanish text~~ no need for now
Fixes#2530
Cleans up every `dummy-*` and `TODO-RENAME-*` method up with either
proper names or by renaming them to `[type-name]-method-[method-id]`
similar to Jak 2's `all-types`.
Also fixes the bad format string in `collide-cache` and adds the event
handler hack to Jak 1.
The game boots and runs fine, but I might have missed a PAL patch or
other manual patches here and there, please double-check if possible.
The last of the missions that had a missing file.
I manually fixed some casting related to a `handle->process`, since this
is the last file...whatever not worth stressing about. But probably an
issue that will crop up in the future.
Co-authored-by: water <awaterford111445@gmail.com>
- decompile `neon-baron-part`, which also has the hideout door for some
reason
- improve a few error messages in static data decompilation
- fix bug with disabling fog in merc
Add the vortex renderer. The vortex texture isn't there yet (it uses the
same texture as clouds), so it uses a checkerboard. But the
colors/vertices seem right.
Definitely needs a clean up pass, but I think the functionality is very
close.
There's a few "hacks" still:
- I am using the emerc logic for environment mapping, which doesn't care
about the length of the normals. I can't figure out how the normal
scaling worked in etie. I want to do a little bit more experimentation
with this before merging.
- There is some part about adgifs for TIE and ETIE that I don't
understand. The clearly correct behavior of TIE/ETIE is that the alpha
settings from the adgif shader are overwritten by the settings from the
renderer. But I can't figure out how this happens in all cases.
- Fade out is completely disabled. I think this is fine because the
performance difference isn't bad. But if you are comparing screenshots
with PCSX2, it will make things look a tiny bit different.
There are *a lot* of file changes and while I have carefully gone
through every gsrc change to fix up manual patches, there might still be
spots that I missed.
My mistake -- testing focused too much on preserving the existing
behaviour I clearly forgot to make sure the new stuff worked properly.
Just had to early out and not modify the args if they were in the new
format.
This fixes the issue where elevators leave you behind (stack structure
related)
At the same time I cleaned up some things I found along the way, most
notably changing `script-context`'s `basic` field to `object` as
non-basics use this method as well.
Fixes#2305
An attempt to cleanup the last CLI interface we have left to cleanup.
- `gk` args now follow the typical convention ie. `--proj-path` instead
of `-proj-path`.
- args that are passed through to the rest of the application / the
game's runtime use the typical convention of following a `--`
- I'm thinking some args shouldn't be handled at this level ie
(`-nodisplay`, `-vm`, `-novm` or `-jak2`) These could be better
documented as legitimate flags and passed in via a nice struct. They
don't seem to be used in `InitParams` but I'll triple check.
There's a temporary shim here so there is no coupled release with the
launcher (right now it executes `gk` with a few args). So I just change
the old args into the new format. After one release cycle, I can change
it in the launcher and delete it here.
I am unsure if this will break the bash shellscript usages -- not sure
which args were usually passed into `$@`
![image](https://user-images.githubusercontent.com/13153231/222035309-b6601719-cdc9-40ee-b36e-e4b135d3f128.png)
Reasons for doing so include:
1. This should stop the confusion around editing the wrong config file's
flags -- when for example, extracting a level. Common settings can be in
one central place, with bespoke overrides being provided for each
version
2. Less verbose way of supporting multiple game versions. You don't have
to duplicate the entire `type_casts` file for example, just add or
override the json objects required.
3. Makes the folder structure consistent, Jak 1's `all-types` is now in
a `jak1` folder, etc.
Work in progress minimap. Known issues:
- "path finding" doesn't appear to work - it gets stuck forever in many
cases
- some nasty patches around timer-based code
- jak arrow blending issues
- would be nice to make it higher resolution
if the search is forced to terminate due to iteration/time limits, the
icon is not in the right place
![image](https://user-images.githubusercontent.com/48171810/221432792-678d6124-a6a6-4875-a91f-7eceedbfec98.png)
I didn't actually visually notice much of a difference with these hacks
unlike in Jak 1, but I also avoided checking the missions thoroughly
since the game crashes very often right now.
Some backtraces are quite large, an option is to increase your terminal
buffer -- but dumping to a file is also useful if you want to share the
crash.
I'm not crazy about the way I hacked this in, but it felt like the least
invasive way for now and I don't want to cause a regression with the
debugger. It's also nice that it dumps with ansi colors as then you can
view the backtrace with the original coloring:
![image](https://user-images.githubusercontent.com/13153231/221460358-991916ad-90f0-445d-ba81-7bc3dbc42eb4.png)
Usage:
```clj
(:di "./stacktrace.log")
```