Definitely needs a clean up pass, but I think the functionality is very
close.
There's a few "hacks" still:
- I am using the emerc logic for environment mapping, which doesn't care
about the length of the normals. I can't figure out how the normal
scaling worked in etie. I want to do a little bit more experimentation
with this before merging.
- There is some part about adgifs for TIE and ETIE that I don't
understand. The clearly correct behavior of TIE/ETIE is that the alpha
settings from the adgif shader are overwritten by the settings from the
renderer. But I can't figure out how this happens in all cases.
- Fade out is completely disabled. I think this is fine because the
performance difference isn't bad. But if you are comparing screenshots
with PCSX2, it will make things look a tiny bit different.
My mistake -- testing focused too much on preserving the existing
behaviour I clearly forgot to make sure the new stuff worked properly.
Just had to early out and not modify the args if they were in the new
format.
An attempt to cleanup the last CLI interface we have left to cleanup.
- `gk` args now follow the typical convention ie. `--proj-path` instead
of `-proj-path`.
- args that are passed through to the rest of the application / the
game's runtime use the typical convention of following a `--`
- I'm thinking some args shouldn't be handled at this level ie
(`-nodisplay`, `-vm`, `-novm` or `-jak2`) These could be better
documented as legitimate flags and passed in via a nice struct. They
don't seem to be used in `InitParams` but I'll triple check.
There's a temporary shim here so there is no coupled release with the
launcher (right now it executes `gk` with a few args). So I just change
the old args into the new format. After one release cycle, I can change
it in the launcher and delete it here.
I am unsure if this will break the bash shellscript usages -- not sure
which args were usually passed into `$@`
This gets rid of the `auto-lt` and `auto-dbg` CLI args to `goalc` that
have been marked deprecated for a month or so at this point. The
behaviour can be replicated via the `startup.gc` file.
I also removed `decompiler_out/` and `log/` from the repo, as our C++
code is smart enough to create these directories if they are missing now
so they are superfluous
Some backtraces are quite large, an option is to increase your terminal
buffer -- but dumping to a file is also useful if you want to share the
crash.
I'm not crazy about the way I hacked this in, but it felt like the least
invasive way for now and I don't want to cause a regression with the
debugger. It's also nice that it dumps with ansi colors as then you can
view the backtrace with the original coloring:
Usage:
```clj
(:di "./stacktrace.log")
```
Increase level heaps and borrow heaps. The level heap increase was
likely not needed, but better safe than sorry. We allocate the 128 MB
main heap anyway so there's no harm.
Also fix the crash when using `-boot`. As I thought it was just a
one-line typo in the kernel.
Adds the `pckernel` system to Jak 2, allowing you to do the PC-specific
things that Jak 1 lets you do like change game resolution, etc.
In other to reduce the amount of code duplication for something that
we're gonna be changing a lot over time, I split it into a few more code
files. In this new system, `pckernel-h.gc`, `pckernel-common.gc`
(previously `pckernel.gc`) and `pc-debug-common.gc` are the files that
should be shared across all games (I hacked the Jak 2 project to pull
these files from the Jak 1 folder), while `pckernel-impl.gc`,
`pckernel.gc` and `pc-debug-methods.gc` are their respective
game-specific counterparts that should be loaded after. I'm not fully
happy with this, I think it's slightly messy, but it cleanly separates
code that should be game-specific and not accidentally copied around and
code that should be the same for all games anyway.
Stops the REPL crashing with `device or resource busy` when running
`(reload)`
However I think this is indicative of a bigger problem where either the
`Compiler` or prompt is not ready to handle input immediately after
creation and setting the status to `OK`.
This automatically generates documentation from goal_src docstrings,
think doxygen/java-docs/rust docs/etc. It mostly supports everything
already, but here are the following things that aren't yet complete:
- file descriptions
- high-level documentation to go along with this (think pure markdown
docs describing overall systems that would be co-located in goal_src for
organizational purposes)
- enums
- states
- std-lib functions (all have empty strings right now for docs anyway)
The job of the new `gen-docs` function is solely to generate a bunch of
JSON data which should give you everything you need to generate some
decent documentation (outputting markdown/html/pdf/etc). It is not it's
responsibility to do that nice formatting -- this is by design to
intentionally delegate that responsibility elsewhere. Side-note, this is
about 12-15MB of minified json for jak 2 so far :)
In our normal "goal_src has changed" action -- we will generate this
data, and the website can download it -- use the information to generate
the documentation at build time -- and it will be included in the site.
Likewise, if we wanted to include docs along with releases for offline
viewing, we could do so in a similar fashion (just write a formatting
script to generate said documentation).
Lastly this work somewhat paves the way for doing more interesting
things in the LSP like:
- whats the docstring for this symbol?
- autocompleting function arguments
- type checking function arguments
- where is this symbol defined?
- etc
Fixes#2215
Moves PC-specific entity and debug menu things to `entity-debug.gc` and
`default-menu-pc.gc` respectively and makes `(declare-file (debug))`
work as it should (no need to wrap the entire file in `(when
*debug-segment*` now!).
Also changes the DGO descriptor format so that it's less verbose. It
might break custom levels, but the format change is very simple so it
should not be difficult for anyone to update to the new format. Sadly,
you lose the completely useless ability to use DGO object names that
don't match the source file name. The horror!
I've also gone ahead and expanded the force envmap option to also force
the ripple effect to be active. I did not notice any performance or
visual drawbacks from this. Gets rid of some distracting LOD and some
water pools appearing super flat (and pitch back for dark eco).
Fixes#1424
draft because using the array is a little weird still, don't feel like
dealing with window's slow debugging builds today.
I get the following weird error:
```clj
(define test-array (new 'static 'boxed-array :type type vector))
gr> (-> test-array 0)
1538004 #x1777d4 0.0000 vector
gr> (type? (-> test-array 0) type)
1342757 #x147d25 0.0000 #t
gr> (new 'static (-> test-array 0))
-- Compilation Error! --
Got 3 arguments, but expected 2
Form:
(-> test-array 0)
Location:
Program string:1
(new 'static (-> test-array 0))
^
Code:
(new 'static (-> test-array 0))
```
Maybe this is expected though and the `new` method wants a symbol, not a
type?
Fixes#2060
Co-authored-by: water <awaterford111445@gmail.com>
- lets you split up your `startup.gc` file into two sections
- one that runs on initial startup / reloads
- the other that runs when you listen to a target
- allows for customization of the keybinds added a month or so ago
- removes a useless flag (--startup-cmd) and marks others for
deprecation.
- added another help prompt that lists all the keybinds and what they do
Co-authored-by: water <awaterford111445@gmail.com>
It used to automatically assign actor IDs, but reset in between custom
levels, so it was possible for actors to share the same actor id with a
actor in another level. With this the user can now specify a base_id to
make sure that the custom levels never match! (or fix it if they do!)
Running reference tests/decompiler should now be possible on macos
(arm). Most of the changes were just cleaning up places where we were
sloppy with ifdefs, but there were two interesting ones:
- `Printer.cpp` was updated to not use a recursive function for printing
lists, to avoid stack overflow
- I replaced xxhash with another version of the same library that
supports arm (the one that comes in zstd). The interface is C instead of
C++ but it's not bad to use. I confirmed that the extractor succeeds on
jak 1 iso so it looks like this gives us the same results as the old
library.
This solves two main problems:
- the looming threat of running out of memory since every thread would
consume duplicate (and probably not needed) resources
- though I will point out, jak 2's offline tests seem to hardly use any
memory even with 400+ files, duplicated across many threads. Where as
jak 1 does indeed use tons more memory. So I think there is something
going on besides just the source files
- condense the output so it's much easier to see what is happening / how
close the test is to completing.
- one annoying thing about the multiple thread change was errors were
typically buried far in the middle of the output, this fixes that
- refactors the offline test code in general to be a lot more modular
The pretty printing is not enabled by default, run with `-p` or
`--pretty-print` if you want to use it
https://user-images.githubusercontent.com/13153231/205513212-a65c20d4-ce36-44f6-826a-cd475505dbf9.mp4
This allows you to not have to define the entire file path to a source
file to re-compile and load it. Technically a stop-gap until editor
tools are developed around writing OpenGOAL.
As opposed to `(ml "goal_src/jak2/engine/game/main.gc")` (which still
works)
This is accomplished via the following config (connection attempts is
irrelevant):
```json
{
"numConnectToTargetAttempts": 1,
"jak2": {
"asmFileSearchDirs": [
"goal_src/jak2"
]
}
}
```
This also provides a way to make game-specific configurations for the
REPL fairly easily.
- You can define a `startup.gc` in your user folder, each line will be
executed on startup (deprecates the usefulness of some cli flags)
- You can define a `repl-config.json` file to override REPL settings.
Long-term this is a better approach than a bunch of CLI flags as well
- Via this, you can override the amount of time the repl will attempt to
listen for the target
- At the same time, I think i may have found why on Windows it can
sometimes take forever to timeout when the game dies, will dig into this
later
- Added some keybinds for common operations, shown here
https://user-images.githubusercontent.com/13153231/202890278-1ff2bb06-dddf-4bde-9178-aa0883799167.mp4
> builds the game, connects to it, attaches a debugger and continues,
launches it, gets the backtrace, stops the target -- all with only
keybinds.
If you want these keybinds to work inside VSCode's integrated terminal,
you need to add the following to your settings file
```json
"terminal.integrated.commandsToSkipShell": [
"-workbench.action.quickOpen",
"-workbench.action.quickOpenView"
]
```
This PR does a few main things:
- finish decompiling the progress related code
- implemented changes necessary to load the text files end-to-end
- japanese/korean character encodings were not added
- finish more camera code, which is required to spawn the progress menu
/ init the default language settings needed for text
- initialized the camera as well
Still havn't opened the menu as there are a lot of checks around
`*target*` which I havn't yet gone through and attempted to comment out.
Favors the `lg` namespace over `fmt` directly, as this will output the
logs to a file / has log levels.
I also made assertion errors go to a file, this unfortunately means
importing `lg` and hence `fmt` which was attempted to be avoided before.
But I'm not sure how else to do this aspect without re-inventing the
file logging.
We have a lot of commented out prints as well that we should probably
cleanup at some point / switch them to trace level and default to `info`
level.
I noticed the pattern of disabling debug logs behind some boolean,
something to consider cleaning up in the future -- if our logs were more
structured (knowing where they are coming from) then a lot this
boilerplate could be eliminated.
Closes#1358
And everything else needed for them!
A couple functions are bad currently.
- fixes#1929 - untested on linux
- fixes#1924 - now you need to type `,` before a lambda you want to put
in a pair.
- fix debugger symbol table in jak 2
- made the decompiler output `(meters 2)` instead of `(meters 2.0)`
- fixed a bug with the bitfield enum special -1 case
- made bad game text decomp not exit the decompiler
- added `editable-player` and `script`
Just missing `target-board-handler` because it errored with `Bad delay
slot in clean_up_cond_no_else_final` and I wasn't able to figure out
where the asm branch was.
Commented out `target-board-clone-anim` because it crashes even after
adding `clone-anim` and `clone-anim-once`.
- decompile `subdivide`, `wind-work`, `tie-work`, `bsp`, `focus`
- support `ppacb` in compiler
- don't assert when bitfield stuff fails due to constant propgataion
weirdness
- finish up history
- div/mod unsigned assert fix in decompiler
- empty assert fix in decompiler for failed `add` type prop
- make jak 1 performance counters "work" (just measure time)
- fix cast/typos on pcgtb/vftoi15
Has boxed array accessing that prevents me from adding anything to ref
tests (the entire file is lambdas so the access pattern that i would
like to ignore happens at the top-level, can't ignore it.
This code actually already has quite a bit of original docstrings so
it's not too bad in that regard considering a `script-context` can have
16 arbitrary objects. It seems they rarely put more than a single object
in the context and the types are usually obvious / are actually type
checked!
