For example, `AppData/OpenGOAL/jak2/features/speedrun-categories.json`
is defined as such:
```json
[
{
"cheats": 0,
"completed_task": 0,
"continue_point_name": "",
"features": 0,
"forbidden_features": 992,
"name": "Gunless",
"secrets": 0
},
{
"cheats": 1,
"completed_task": 29,
"continue_point_name": "ctypal-shaft",
"features": 1024,
"forbidden_features": 0,
"name": "Turbo Jetboard - After Praxis 1",
"secrets": 0
}
]
```
> These entries can be created using the in-game menu as well.
https://github.com/open-goal/jak-project/assets/13153231/9b17a116-4aa9-40ad-b9f5-02b04e0ad4f3
---------
Co-authored-by: dallmeyer <2515356+dallmeyer@users.noreply.github.com>
This sets up the C Kernel for Jak 3, and makes it possible to build and
load code built with `goalc --jak3`.
There's not too much interesting here, other than they switched to a
system where symbol IDs (unique numbers less than 2^14) are generated at
compile time, and those get included in the object file itself.
This is kind of annoying, since it means all tools that produce a GOAL
object file need to work together to assign unique symbol IDs. And since
the symbol IDs can't conflict, and are only a number between 0 and 2^14,
you can't just hash and hope for no collisions.
We work around this by ignoring the IDs and re-assigning our own. I
think this is very similar to what the C Kernel did on early builds of
Jak 3 which supported loading old format level files, which didn't have
the IDs included.
As far as I can tell, this shouldn't cause any problems. It defeats all
of their fancy tricks to save memory by not storing the symbol string,
but we don't care.
Boards that have no runs yet look kinda awkward but i'd rather just wait
until those fill out (won't take long) rather than add another string to
be translated.
Switches the slime look up table to be a texture, since I guess intel
drivers are terrible and putting the array in the shader makes it
extremely slow.
Also, a few minor changes:
- removed art-groups from the test-zone levels since this causes the
compiler to re-decompile the game, and makes the launcher slower. (left
it in commented out)
- Switched `decompile_code` to false by default in jak 2, in case people
run the decompiler and don't want to wait forever
- Fixed build warnings
- fix deci2 hang when closing the game in retail mode.
- change bigmap to always filter because the pixels look really ugly.
- don't start the game in fullscreen by default if we're debugging.
Trying to make up for some of the startup speed lost in the SDL
transition. This saves about 1s from start (from ~3s), and about 500 MB
of RAM.
- Faster TIE unpack by merging matrix groups, more efficient vertex
transforms, and skipping normal transforms on groups with no normals.
- Refactor generic merc and merc to use a single renderer with multiple
interfaces, rather than many renderers. Removed "LightningRenderer" as a
special thing, but Warp is still special
- Add more profiling stuff to startup and the loader.
- Remove `SDL_INIT_HAPTIC` - this turned out to be needed for
force-feedback steering wheels, and not needed for controller vibration
- Switched `vag-player` to use quicksort instead of the default GOAL
sort (very slow)
Also fixed an original game bug in `loader.gc` on a method that's called
quite often, though I have no clue what erroneous behavior it could have
even caused.
This PR is a combination of
https://github.com/open-goal/jak-project/pull/2507 and some additional
changes to port Shadow VU1 to OpenGL. As far as I can tell, it's
working.
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
Updates the decompiler for the new format and there's new macros. This
new format should be easier to read/parse.
Also rewrote `sp-init-fields!` (both jak 1 and 2) from assembly to GOAL.
Hopefully I did not miss any regressions in Jak 1/2 while updating the
files, it's a lot.
This should fix a bunch of texture-related issues by generating a table
of overlapping textures and just... adjusting them slightly so they
don't overlap. It's not the most elegant solution in the world, but I
think it's no worse than the existing hard-coded tpage dir stuff.
My mistake -- testing focused too much on preserving the existing
behaviour I clearly forgot to make sure the new stuff worked properly.
Just had to early out and not modify the args if they were in the new
format.
An attempt to cleanup the last CLI interface we have left to cleanup.
- `gk` args now follow the typical convention ie. `--proj-path` instead
of `-proj-path`.
- args that are passed through to the rest of the application / the
game's runtime use the typical convention of following a `--`
- I'm thinking some args shouldn't be handled at this level ie
(`-nodisplay`, `-vm`, `-novm` or `-jak2`) These could be better
documented as legitimate flags and passed in via a nice struct. They
don't seem to be used in `InitParams` but I'll triple check.
There's a temporary shim here so there is no coupled release with the
launcher (right now it executes `gk` with a few args). So I just change
the old args into the new format. After one release cycle, I can change
it in the launcher and delete it here.
I am unsure if this will break the bash shellscript usages -- not sure
which args were usually passed into `$@`
Increase level heaps and borrow heaps. The level heap increase was
likely not needed, but better safe than sorry. We allocate the 128 MB
main heap anyway so there's no harm.
Also fix the crash when using `-boot`. As I thought it was just a
one-line typo in the kernel.
Adds the `pckernel` system to Jak 2, allowing you to do the PC-specific
things that Jak 1 lets you do like change game resolution, etc.
In other to reduce the amount of code duplication for something that
we're gonna be changing a lot over time, I split it into a few more code
files. In this new system, `pckernel-h.gc`, `pckernel-common.gc`
(previously `pckernel.gc`) and `pc-debug-common.gc` are the files that
should be shared across all games (I hacked the Jak 2 project to pull
these files from the Jak 1 folder), while `pckernel-impl.gc`,
`pckernel.gc` and `pc-debug-methods.gc` are their respective
game-specific counterparts that should be loaded after. I'm not fully
happy with this, I think it's slightly messy, but it cleanly separates
code that should be game-specific and not accidentally copied around and
code that should be the same for all games anyway.
Notable things:
- This assert is hit when trying to save the pc-settings file, NYI
e630b50690/game/kernel/common/Symbol4.h (L14)
so right now settings aren't persisted. But RPC defaults to on
- The existing functions can probably be made generic based off the game
version, but I didn't spend time refactoring them yet as they aren't
really ready to be used in jak 2 yet (we have no screenshots for the
levels for example)
This adds a new ImGUI menu to help filter out the clutter on screen.
https://user-images.githubusercontent.com/13153231/210192912-b1c28319-bacb-449c-ad7f-e7308fb75f50.mp4
This also:
- moves the imgui display bool into a game specific config file (you can
hide it in jak1, and not in jak2)
- the config file also persists the settings from this menu (except the
filters for now, future TODO)
- there is a new `ignore_imgui_hide_keybind` in this file to ignore
hiding it when you press Alt
Running reference tests/decompiler should now be possible on macos
(arm). Most of the changes were just cleaning up places where we were
sloppy with ifdefs, but there were two interesting ones:
- `Printer.cpp` was updated to not use a recursive function for printing
lists, to avoid stack overflow
- I replaced xxhash with another version of the same library that
supports arm (the one that comes in zstd). The interface is C instead of
C++ but it's not bad to use. I confirmed that the extractor succeeds on
jak 1 iso so it looks like this gives us the same results as the old
library.
And everything else needed for them!
A couple functions are bad currently.
- fixes#1929 - untested on linux
- fixes#1924 - now you need to type `,` before a lambda you want to put
in a pair.
- fix debugger symbol table in jak 2
- made the decompiler output `(meters 2)` instead of `(meters 2.0)`
- fixed a bug with the bitfield enum special -1 case
- made bad game text decomp not exit the decompiler
- added `editable-player` and `script`
* game: restore windowed mode settings properly
* game: use the game version for saving settings/saves
* game: prevent windowed mode from being auto-centered on initial init
* game: save and restore window coordinates
* lint: formatting
