I hope this is everything I needed, and nothing I didn't.
## What's Changed
This update adds a command-line parameter to goalc, `--iso-path`.
Providing a path to a directory like
`D:\Files\Repositories\ArchipelaGOAL\iso_data\jak1` will inform the
compiler to use that directory instead.
## Why is this useful?
When combined with `--proj-path`, the compiler can be pointed to a
completely different project folder, given the `(mi)` command, and
immediately begin building from that directory, with everything it
needs. This eliminates the need to copy `iso_data` to multiple `data`
directories.
If a subsequent change to the Launcher is made, each mod could be passed
an --iso-path pointing to a single shared folder, allowing mods to each
run their own REPL _without_ requiring a copy of `iso_data` in a
subfolder.
## Independent testing required!
My local repositories are a little suspect, with a mod, a fork of
mod-base, and a fork of jak-project, all on the same drive. My
decompiler_out and iso_data folders are in the mod repo, not mod-base
nor jak-project. So what I did was make the change in the mod-base fork,
point `--proj-path and --iso-path` to the mod folders, and then ran
`(mi)`. The output showed a build starting with no errors.
Then I had to create this PR, which my fork of mod-base is unable to do,
so I created a patch file, forked jak-project, then applied the patch
there.
All this is to say that it would be preferable if someone could apply
this code to their own installation and see if it works. Even I wouldn't
take my own word for this.
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
This adds some new JSON entries to custom levels so they can support
vanilla sky textures and the texture remapping tables, allowing for
proper textures on objects that use `generic`, like dark eco pools or
dying enemies.
The comments explain it in more detail, but the gist is:
For skies:
- `sky` needs to be a vanilla level that has sky textures.
- The alpha tpage (fourth entry in `tpages`) needs to be that vanilla
level's alpha tpage (if `tex_remap` is the same level as `sky`, this
will be handled automatically).
- The tpage needs to be added to the custom level `.gd` and to
`textures` in the JSON.
- In `level-info.gc`, `sky` needs to be `#t`, your level's mood needs to
call `update-mood-sky-texture` (the default mood, `update-mood-default`,
handles this as an example) and `sun-fade` needs to be nonzero for the
sun to show up.
For `generic` textures:
- `tex_remap` needs to be the name of a vanilla level.
- When using a vanilla level's remap table, you need to adhere to the
order of the files in that level's `.gd` in your own level.
- Code files are first.
- Then the tpages (in the order `tfrag`, `pris`, `shrub`, `alpha`,
`water`).
- Then the art groups.
- Lastly, the level file.
- The tpages need to be added to the `textures` in the JSON.
This only applies to the background for now:
- support for alpha for vertex colors in custom levels
- switch time of day palette generation from octree to k-d tree
- support for alpha masking in custom levels
- support for transparent textures
- support for envmap in custom levels
---------
Co-authored-by: water111 <awaterford1111445@gmail.com>
This adds a feature to `build_actor` to support importing skeletons and
animations from .glb files.
Multiple animations are handled and will use the name in the GLB. The
default `viewer` process will end up playing back the first animation.
There are a few limitations:
- You can only have around 100 bones. It is technically possibly to have
slightly more, but certain animations may fail to compress when there
are more than ~100 bones.
- Currently, all animations have 60 keyframes per second. This is a
higher quality than what is normally used. If animation size becomes
problematic, we could make this customizable somehow.
- There is no support for the `align` bone.
---------
Co-authored-by: water111 <awaterford1111445@gmail.com>
This adds support for replacing existing merc models in FR3 files with
custom GLB model files. The replacements go in
`custom_assets/<GAME>/merc_replacements`, similar to texture
replacements. When a `.glb` file with a file name that matches any model
present in an FR3 is detected (e.g. `eichar-lod0` for Jak), all merc
model data is replaced with the given model.
Additionally, models for custom actors can now also be added to vanilla
FR3s. The models for this go in
`custom_assets/<GAME>/models/<LEVEL_NAME>` (e.g.
`custom_assets/jak1/models/jungleb/test-actor-lod0.glb`) and will be
added to the FR3 that has a matching name (exception: to add things to
the common level file, the folder should be named `common` instead of
`GAME`).
For custom levels, these now go in
`custom_assets/<GAME>/models/custom_levels` (previously
`custom_assets/<GAME>/models`).
Another small change: When level ripping is enabled, the resulting model
files will now be stored in game name subfolders inside of `glb_out`.
This adds support for generating collide meshes when importing custom
models. A couple of things to keep in mind:
- A single `collide-mesh` may only have up to 255 vertices.
- When exporting a GLTF file in Blender, a `collide-mesh` will be
generated for every mesh object that has collision properties applied
(ideally, you would set all visual meshes to `ignore` and your collision
meshes to `invisible` in the OpenGOAL plugin's custom properties).
- Ensure that your actor using the model properly allocates enough
`collide-shape-prim-mesh`es for each `collide-mesh` ([example from the
original game that uses multiple
meshes](f6688659f2/goal_src/jak1/levels/finalboss/robotboss.gc (L2628-L2806))).
~One annoying problem that I haven't fully figured out yet (unrelated to
the actual functionality):
`collide-mesh`es are stored in art groups as an `(array collide-mesh)`
in the `art-joint-geo`'s `extra`, so I had to add a new `Res` type to
support this. The way that `array`s are stored in `res-lump`s is a bit
of a hack right now. The lump only stores a pointer to the array, so the
size of that is 4 bytes, but because we have to generate all the actual
array data too, the current `ResLump` code in C++ doesn't handle this
case well and would assert, so I decided to omit the asserts if an
`array` tag is present and "fake" the size so the object file is
generated more closely to how the game expects it until we figure out
something better.~
This was fixed by generating the array data beforehand and creating a
`ResRef` class that takes the pointer to the array data and adds it to
the lump.
This does a couple of things:
- The `custom_levels` folder was renamed to `custom_assets` and contains
`levels`, `models` and `texture_replacements` folders for Jak 1, 2 and 3
in order to keep everything regarding custom stuff in one place.
- With this, texture replacements now use separate folders for all games
- A build actor tool was added that generates art groups for custom
actors
- Custom levels can now specify what custom models from the `models`
folder they want to import, this will add them to the level's FR3.
- A `test-zone-obs.gc` file was added, containing a `test-actor` process
that uses a custom model as an example.
The build actor tool is still very WIP, the joints and the default
animation are hardcoded, but it allows for importing any GLB file as a
merc model.
Adds a quick perf report feature to `goalc` that lets you compare how
much faster / slower it takes to compile the projects, with some simple
features like filtering the files, adjusting for how large of a margin
of error in the speeds you care about, and which test iteration you want
to compare against.
This is something I plan to use as I work more in `goalc` as an easy way
to track / show the results.
Relates to #1353
This adds no new functionality or overhead to the compiler, yet. This is
the preliminary work that has:
- added code to the compiler in several spots to flag when something is
used without being properly required/imported/whatever (disabled by
default)
- that was used to generate project wide file dependencies (some
circulars were manually fixed)
- then that graph underwent a transitive reduction and the result was
written to all `jak1` source files.
The next step will be making this actually produce and use a dependency
graph. Some of the reasons why I'm working on this:
- eliminates more `game.gp` boilerplate. This includes the `.gd` files
to some extent (`*-ag` files and `tpage` files will still need to be
handled) this is the point of the new `bundles` form. This should make
it even easier to add a new file into the source tree.
- a build order that is actually informed from something real and
compiler warnings that tell you when you are using something that won't
be available at build time.
- narrows the search space for doing LSP actions -- like searching for
references. Since it would be way too much work to store in the compiler
every location where every symbol/function/etc is used, I have to do
ad-hoc searches. By having a dependency graph i can significantly reduce
that search space.
- opens the doors for common shared code with a legitimate pattern.
Right now jak 2 shares code from the jak 1 folder. This is basically a
hack -- but by having an explicit require syntax, it would be possible
to reference arbitrary file paths, such as a `common` folder.
Some stats:
- Jak 1 has about 2500 edges between files, including transitives
- With transitives reduced at the source code level, each file seems to
have a modest amount of explicit requirements.
Known issues:
- Tracking the location for where `defmacro`s and virtual state
definitions were defined (and therefore the file) is still problematic.
Because those forms are in a macro environment, the reader does not
track them. I'm wondering if a workaround could be to search the
reader's text_db by not just the `goos::Object` but by the text
position. But for the purposes of finishing this work, I just statically
analyzed and searched the code with throwaway python code.
This adds hfrag, but with a few remaining issues:
- The textures aren't animated. Instead, it just uses one texture.
- The texture filtering isn't as good as at it could be.
I also cleaned up a few issues with the background renderers:
- Cleaned up some stuff that is common to hfrag, tie, tfrag, shrub
- Moved time-of-day color packing stuff to FR3 creation, rather than at
level load. This appears to reduce the frame time spikes when a level is
first drawn by about 5 or 6 ms in big levels.
- Cleaned up the x86 specific stuff used in time of day. Now there's
only one place where we have an `ifdef`, rather than spreading it all
over the rendering code.
This fixes issues with certain Jak 3 levels not rendering because there
is a mismatch between the DGO name, nickname and real level name (bsp
name).
FR3s use a different filename, so you can delete the ones you have after
this is merged.
This affects custom levels, but I don't have that toolchain set up so
someone else will have to test that.
Patching up the extractor while working on the launcher, fixes:
- makes it so you can compile successfully given a folder path
(currently assumes your project path contains `iso_data`)
- ignore `buildinfo.json` from validation code.
- fixes an edge-case that could recursively fill up your entire
hard-drive!
- allows overriding the decompilation configuration via flag
- adds a way to specify where the ISO should be extracted to
I noticed that jak 3's compilation was spending a lot of time accessing
the `unordered_map`s we use to store constants and symbol types.
I repurposed the `EnvironmentMap` originally made for GOOS for this. It
turns out that we were copying the entire constant map whenever we
encountered a `deftype`, and fixed that too.
This speeds up jak3 compiles from ~16 to 11 seconds for me.
The `test-play` macro is back, though it doesn't call `play` yet. We can
at least load all of `game.cgo`, which involves loading a lot of the
code we've decompiled, loading/linking objects files compiled by
OpenGOAL (like dir-tpages), and loading/linking Jak's art-groups (for
jak 3 they are stored v5 format that I added to the linker).
There were no major issues - just a few forgotten mips2c entries and
minor bugs/functions that needed stubs. Most of the work was updating
the linker. Hopefully I'll never have to touch that code again - I think
it supports everything we need for jak 3!
- `fma-sphere`
- `prim-beam-h`
- `cam-start`
- `ragdoll`
- `light-trails-h`
- `light-trails`
- `menu`
- `water`
- `water-flow`
- `hud`
- `hud-classes`
- `progress`
- `progress-draw`
---
The `get-texture` macro replaces calls to `lookup-texture-by-id` and
`lookup-texture-by-id-fast`. The `defpart` macro detection was modified
to print a pair like `(texture-name tpage-name)` for the texture field
that gets turned into a `texture-id` constant. Only used in Jak 3 at the
moment, I'll probably go through the other games at a later point.
Reverse engineer the skinning matrix calculation and port to GOAL. This
is about 3x faster than the MIPS2c version.
As usual, there is a `*use-new-bones*` flag to go back to the old
version.
Fix for a bug in the compiler's `.div.vf` implementation (only happens
if src/dst are the same), and fix for a typo in the register allocator
that would sometimes cause it not to consider xmm8-xmm15.
This updates `fmt` to the latest version and moves to just being a copy
of their repo to make updating easier (no editing their cmake / figuring
out which files to minimally include).
The motivation for this is now that we switched to C++ 20, there were a
ton of deprecated function usages that is going away in future compiler
versions. This gets rid of all those warnings.
Adds two new lump types: `cell-info` and `buzzer-info`.
`cell-info` takes a `game-task` enum value and defines an `eco-info`
lump for power cells.
`buzzer-info` takes a `game-task` enum value and an integer and
automatically calculates the required value for the buzzer task with the
formula `task + buzzer * (1 << 16)`.
When giving entities custom actor IDs in your level JSON, it is possible
to break entity lookups by actor ID if the actors are not sorted by ID
because `entity-by-aid` expects them to be in order.
This sorts the actor list by ID before generating the level file and
also checks for any duplicates.
This sets up the C Kernel for Jak 3, and makes it possible to build and
load code built with `goalc --jak3`.
There's not too much interesting here, other than they switched to a
system where symbol IDs (unique numbers less than 2^14) are generated at
compile time, and those get included in the object file itself.
This is kind of annoying, since it means all tools that produce a GOAL
object file need to work together to assign unique symbol IDs. And since
the symbol IDs can't conflict, and are only a number between 0 and 2^14,
you can't just hash and hope for no collisions.
We work around this by ignoring the IDs and re-assigning our own. I
think this is very similar to what the C Kernel did on early builds of
Jak 3 which supported loading old format level files, which didn't have
the IDs included.
As far as I can tell, this shouldn't cause any problems. It defeats all
of their fancy tricks to save memory by not storing the symbol string,
but we don't care.
This sets out the bones of a Jak 3 build, many things are stubbed out,
guessed, or copied from Jak 2 but it should at least be good enough to:
run `task set-game-jak3`
launch the repl
run builds from the repl
build outputs themselves are untested but the build itself runs without
errors
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
Updates Zydis to it's latest commit, this should fix building the
project on intel macs with a more recent version of macOS. This likely
needs some sanity checks that the debugger stuff still works as
expected.
This adds support for using enums in lumps using the new lump types
`enum-int32` and `enum-uint32`. Also adds these other new lump types:
- `water-height` (takes 3 meter floats, an enum and another optional
meter float)
- `eco-info` (takes an enum and an int)
- `vector3m` (3 meter floats + `w` set to 1.0)
The logger used in `goalc` tries to print an already-formatted string
`message` using `fmt::print(message);` Usually this doesn't cause
problems, but if you try to print, for example, an exception that has
special characters (notably `{`) it will try to do another round of
formatting/replacements, despite not having any args to replace with,
which ends up throwing another exception. This is why errors when
parsing custom level JSON cause the REPL to exit.
I've hopefully identified all the various instances of this across the
codebase
Major change to how `deftype` shows up in our code:
- the decompiler will no longer emit the `offset-assert`,
`method-count-assert`, `size-assert` and `flag-assert` parameters. There
are extremely few cases where having this in the decompiled code is
helpful, as the types there come from `all-types` which already has
those parameters. This also doesn't break type consistency because:
- the asserts aren't compared.
- the first step of the test uses `all-types`, which has the asserts,
which will throw an error if they're bad.
- the decompiler won't emit the `heap-base` parameter unless necessary
now.
- the decompiler will try its hardest to turn a fixed-offset field into
an `overlay-at` field. It falls back to the old offset if all else
fails.
- `overlay-at` now supports field "dereferencing" to specify the offset
that's within a field that's a structure, e.g.:
```lisp
(deftype foobar (structure)
((vec vector :inline)
(flags int32 :overlay-at (-> vec w))
)
)
```
in this structure, the offset of `flags` will be 12 because that is the
final offset of `vec`'s `w` field within this structure.
- **removed ID from all method declarations.** IDs are only ever
automatically assigned now. Fixes#3068.
- added an `:overlay` parameter to method declarations, in order to
declare a new method that goes on top of a previously-defined method.
Syntax is `:overlay <method-name>`. Please do not ever use this.
- added `state-methods` list parameter. This lets you quickly specify a
list of states to be put in the method table. Same syntax as the
`states` list parameter. The decompiler will try to put as many states
in this as it can without messing with the method ID order.
Also changes `defmethod` to make the first type definition (before the
arguments) optional. The type can now be inferred from the first
argument. Fixes#3093.
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
Started at 349,880,038 allocations and 42s
- Switched to making `Symbol` in GOOS be a "fixed type", just a wrapper
around a `const char*` pointing to the string in the symbol table. This
is a step toward making a lot of things better, but by itself not a huge
improvement. Some things may be worse due to more temp `std::string`
allocations, but one day all these can be removed. On linux it saved
allocations (347,685,429), and saved a second or two (41 s).
- cache `#t` and `#f` in interpreter, better lookup for special
forms/builtins (hashtable of pointers instead of strings, vector for the
small special form list). Dropped time to 38s.
- special-case in quasiquote when splicing is the last thing in a list.
Allocation dropped to 340,603,082
- custom hash table for environment lookups (lexical vars). Dropped to
36s and 314,637,194
- less allocation in `read_list` 311,613,616. Time about the same.
- `let` and `let*` in Interpreter.cpp 191,988,083, time down to 28s.
This change adds a few new features:
- Decompiler automatically knows the type of `find-parent-method` use in
jak 1 and jak2 when used in a method or virtual state handler.
- Decompiler inserts a call to `call-parent-method` or
`find-parent-state`
- Removed most casts related to these functions
There are still a few minor issues around this:
- There are still some casts needed when using `post` methods, as `post`
is just a `function`, and needs a cast to `(function none)` or similar.
It didn't seem easy to change the type of `post`, so I'm not going to
worry about it for this PR. It only shows up in like 3 places in jak 2.
(and 0 in jak 1)
- If "call the handler if it's not #f" logic should probably be another
macro.
Fixes#805
