# This test runs FRR and checks if OSPF routing works. # # Network topology: # [ client ]--net1--[ router1 ]--net2--[ router2 ]--net3--[ server ] # # All interfaces are in OSPF Area 0. import ./make-test-python.nix ({ pkgs, ... }: let ifAddr = node: iface: (pkgs.lib.head node.config.networking.interfaces.${iface}.ipv4.addresses).address; ospfConf1 = '' router ospf network 192.168.0.0/16 area 0 ''; ospfConf2 = '' interface eth2 ip ospf hello-interval 1 ip ospf dead-interval 5 ! router ospf network 192.168.0.0/16 area 0 ''; in { name = "frr"; meta = with pkgs.lib.maintainers; { maintainers = [ ]; }; nodes = { client = { nodes, ... }: { virtualisation.vlans = [ 1 ]; networking.defaultGateway = ifAddr nodes.router1 "eth1"; }; router1 = { ... }: { virtualisation.vlans = [ 1 2 ]; boot.kernel.sysctl."net.ipv4.ip_forward" = "1"; networking.firewall.extraCommands = "iptables -A nixos-fw -i eth2 -p ospfigp -j ACCEPT"; services.frr.ospf = { enable = true; config = ospfConf1; }; specialisation.ospf.configuration = { services.frr.ospf.config = ospfConf2; }; }; router2 = { ... }: { virtualisation.vlans = [ 3 2 ]; boot.kernel.sysctl."net.ipv4.ip_forward" = "1"; networking.firewall.extraCommands = "iptables -A nixos-fw -i eth2 -p ospfigp -j ACCEPT"; services.frr.ospf = { enable = true; config = ospfConf2; }; }; server = { nodes, ... }: { virtualisation.vlans = [ 3 ]; networking.defaultGateway = ifAddr nodes.router2 "eth1"; }; }; testScript = { nodes, ... }: '' start_all() # Wait for the networking to start on all machines for machine in client, router1, router2, server: machine.wait_for_unit("network.target") with subtest("Wait for Zebra and OSPFD"): for gw in router1, router2: gw.wait_for_unit("zebra") gw.wait_for_unit("ospfd") router1.succeed("${nodes.router1.config.system.build.toplevel}/specialisation/ospf/bin/switch-to-configuration test >&2") with subtest("Wait for OSPF to form adjacencies"): for gw in router1, router2: gw.wait_until_succeeds("vtysh -c 'show ip ospf neighbor' | grep Full") gw.wait_until_succeeds("vtysh -c 'show ip route' | grep '^O>'") with subtest("Test ICMP"): client.wait_until_succeeds("ping -4 -c 3 server >&2") ''; })