William Casarin
ffcb272e01
antimicro: 2.22 -> 2.23
2017-02-20 22:13:54 +01:00
Franz Pletz
c302cb4910
gitlab: 8.16.4 -> 8.16.6
2017-02-20 21:53:17 +01:00
Vladimír Čunát
3ba1875743
mesa: maintenance 13.0.4 -> 13.0.5
...
I'm being conservative here until 17.0.1 is released.
2017-02-20 21:53:03 +01:00
Matthew Daiter
007380362c
riak: change filename to appropriate version
2017-02-20 21:46:44 +01:00
Vladimír Čunát
9458018a87
dbus: 1.10.14 -> 1.10.16
...
It's for "security" issue that's considered unexploitable with a sane
config.
2017-02-20 21:38:24 +01:00
Vladimír Čunát
dbae14164b
glib: maintenance 2.50.2 -> 2.50.3
2017-02-20 21:33:03 +01:00
Vladimír Čunát
4339dca980
gdk-pixbuf: maintenance 2.36.4 -> 2.36.5
2017-02-20 21:31:41 +01:00
Vladimír Čunát
62c323bdff
gtk3: maintenance 3.22.7 -> 3.22.8
2017-02-20 21:30:12 +01:00
Vladimír Čunát
5cf7b7c109
cmake: 3.7.1 -> 3.7.2
2017-02-20 21:29:52 +01:00
Rafael de F. Ferreira
1daf49ccf4
idea-community: 2016.3.3 -> 2016.3.4
2017-02-20 21:25:20 +01:00
Frederik Rietdijk
27bcb857b1
Merge pull request #23021 from rasendubi/python-evdev
...
pythonPackages.evdev: 0.4.7 -> 0.6.4
2017-02-20 21:24:57 +01:00
Vladimír Čunát
5a38ab8add
Merge branch 'master' into staging
2017-02-20 21:24:35 +01:00
Vladimír Čunát
292efffb62
libuv: 1.10.1 -> 1.11.0
...
And a nitpick in the expression.
2017-02-20 21:23:47 +01:00
Vladimír Čunát
2cb76ff1ff
Merge branch 'glibc-2.25' into staging
...
The largest problem-causers should be fixed now (within).
2017-02-20 21:18:48 +01:00
Frederik Rietdijk
dd054e890f
Merge pull request #22061 from Mic92/python3-protobuf
...
python-protobuf: enable python3 and enable py3 tests
2017-02-20 21:17:38 +01:00
Vladimír Čunát
09d02f72f6
Re-revert "Merge: glibc: 2.24 -> 2.25"
...
This reverts commit 55cc7700e9
.
I hope most problems have been solved. /cc #22874 .
2017-02-20 21:16:41 +01:00
Vincent Laporte
b634622be0
compcert: 2.7.1 -> 3.0.1
2017-02-20 20:09:53 +00:00
Vladimír Čunát
0ff2179e0f
gnutls: use 3.5 and remove 3.4
...
3.4 branch detects support for getrandom() call during configure-time,
which gets picked up since glibc-2.25, and consequently it will fail
with older kernels during rutime.
2017-02-20 21:07:35 +01:00
Robin Gloster
8697fb9ec7
Merge pull request #23019 from abbradar/php
...
phpPackages: also default to 7.1
2017-02-20 19:33:43 +01:00
Alexey Shmalko
f0f75433fb
pythonPackages.evdev: 0.4.7 -> 0.6.4
...
pythonPackages.evdev did not work due to
https://github.com/gvalkov/python-evdev/issues/43 .
2017-02-20 19:35:33 +02:00
Nikolay Amiantov
ac8fabd0e0
phpPackages: also default to 7.1
2017-02-20 19:08:12 +03:00
Robin Gloster
183eeb3c0f
simp_le: fix meta.homepage
2017-02-20 16:06:17 +01:00
Graham Christensen
69a0e9ea11
Merge pull request #22985 from Kendos-Kenlen/master
...
idea.webstorm: 2016.3.2 -> 2016.3.3
2017-02-20 10:01:31 -05:00
Thomas Tuegel
7fa06b3cd2
Merge pull request #22991 from layus/deprecate-kde4-ktikz
...
qtikz: update to Qt5; remove ktikz
2017-02-20 08:37:47 -06:00
Peter Simons
8bc0ece0f1
hackage-packages.nix: automatic Haskell package set update
...
This update was generated by hackage2nix v2.0.4-12-gf83834c from Hackage revision
fbb2c029b0
.
2017-02-20 15:28:45 +01:00
Peter Simons
5e3eea0cd3
LTS Haskell 8.2
2017-02-20 15:28:38 +01:00
Peter Simons
d7f10f2828
python-osc: enable (install) bash completion
2017-02-20 15:02:30 +01:00
aszlig
dc31a1ea29
systemd-boot: Unlink loader.conf if it exists
...
Since systemd version 232 the install subcommand of bootctl opens the
loader.conf with fopen() modes "wxe", where the "e" stands for
exclusive, so the call will fail if the file exists.
For installing the boot loader just once this is fine, but if we're
using NIXOS_INSTALL_BOOTLOADER on a systemd where the bootloader is
already present this will fail.
Exactly this is done within the simpleUefiGummiboot installer test,
where nixos-install is called twice and thus the bootloader is also
installed twice, resulting in an error during the fopen call:
Failed to open loader.conf for writing: File exists
Removing the file prior to calling bootctl should fix this.
I've tested this using the installer.simpleUefiGummiboot test and it now
succeeds.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra, @shlevy, @mic92
Fixes : #22925
2017-02-20 14:54:48 +01:00
aszlig
4daccf208f
systemd-boot: Make sure /etc/machine-id exists
...
This leads to the following error when trying to install a new machine
where the machine ID wasn't yet initialized during boot:
Failed to get machine did: No such file or directory
In addition this was also detected by the simpleUefiGummiboot installer
test.
So let's generate a fallback machine ID by using
systemd-machine-id-setup before actually running bootctl.
Tested this by running the installer.simpleUefiGummiboot test, it still
fails but not because of the machine ID.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra, @shlevy, @mic92
Fixes : #22561
2017-02-20 14:54:44 +01:00
Lorenzo Manacorda
2c4d9c9228
manual: Add link to config section ( #22994 )
...
Add link to "Configuration" chapter from "Changing the Configuration" section.
Also, fix grammar error.
(cherry picked from commit a585f987fa
)
2017-02-20 14:32:49 +01:00
Tuomas Tynkkynen
fee43308ed
platforms.nix: Remove unnecessary kernelExtraConfig for ARMv7
...
AHCI_IMX is already enabled in multi_v7_defconfig since kernel 4.9.
2017-02-20 15:22:14 +02:00
Nikolay Amiantov
d8fb60d1d4
Merge pull request #23014 from zraexy/zraexy-bumblebee-pmmethod
...
bumblebee service: Fix pmMethod bbswitch check
2017-02-20 16:18:45 +03:00
Robin Gloster
12b4556642
Merge pull request #22882 from bjornfor/wireshark
...
nixos: add programs.wireshark option
2017-02-20 14:03:30 +01:00
Nikolay Amiantov
ec2c9d57b5
Merge pull request #22568 from abbradar/chromium-updates
...
Chromium updates
2017-02-20 15:49:04 +03:00
Shea Levy
f454297a7d
linux 4.10
2017-02-20 07:32:46 -05:00
Shea Levy
b191ac0d89
Revert "linux 4.10"
...
Somehow the tarball was actually linux 4.4.10
This reverts commit fea71f84d0
.
2017-02-20 07:29:47 -05:00
Robin Gloster
dcba6eae1b
Merge pull request #22116 from LnL7/darwin-cmus
...
cmus: fix darwin
2017-02-20 13:02:30 +01:00
Robin Gloster
464529c603
simp_le: 2016-12-16 -> 0.1.1
2017-02-20 12:48:42 +01:00
Shea Levy
fea71f84d0
linux 4.10
2017-02-20 06:47:49 -05:00
Peter Simons
31759274f1
python-suseapi: 'requests' isn't needed at build-time, but it's needed at run-time
2017-02-20 12:21:59 +01:00
Peter Simons
f0de1dc89d
python-suseapi: add package at version 0.24-5-g9937e3b
2017-02-20 12:11:29 +01:00
Michael Alan Dorman
dc19ba7bc6
beets: enable gstreamer support
...
So this was suggested as [long ago as October, 2015](https://github.com/NixOS/nixpkgs/issues/10376#issuecomment-147734898 ).
Despite being fairly ignorant of the nix Python support, I decided
that I really wanted this; this change brings in what I believe are
the necessary components---I have, at least, successfully run `beet
replaygain` and `beet bpd`---but it may not do it in the best way; I'm
happy to consider input on that front.
I can at least state that all three changes are necessary---leave any
one of them out and gstreamer support doesn't work.
2017-02-20 11:44:48 +01:00
Frederik Rietdijk
c79371b823
kdeconnect: 1.0 -> 1.0.3
2017-02-20 11:44:14 +01:00
Frederik Rietdijk
ffe6935ea8
kile: 2016-10-24 -> 2017-02-09
2017-02-20 11:44:14 +01:00
Frederik Rietdijk
9d48d3774e
Merge pull request #22713 from richardlarocque/antfs-cli
...
antfs-cli and openant: init at unstable-2017-02-11
2017-02-20 09:06:02 +01:00
zraexy
5abca15f21
bumblebee service: Fix pmMethod bbswitch check
...
Made useBbswitch work when pmMethod is "auto" and removed invalid pmMethod option "nouveau".
2017-02-19 22:46:47 -09:00
florianjacob
c23c2c50de
munin service: listen on IPv6 loopback as well ( #23012 )
...
munin service: listen on IPv6 loopback as well
2017-02-20 06:13:48 +01:00
Arian van Putten
252fbbf2d2
mattermost sevice: JoinsNamespaceOf for local pgsql ( #22899 )
2017-02-20 04:43:04 +01:00
Franz Pletz
60555c7c0a
Merge pull request #22969 from symphorien/extrainitrd
...
grub module: add extraInitrd option
2017-02-20 04:32:48 +01:00
Daniel Fullmer
a8c738713b
gnupg21: Fix scdaemon for usb smartcards ( #22891 )
...
The use of smartcard functionality for yubikeys (and presumably other
usb smartcards) was broken in gnupg 2.1.18. This has apparently already
been fixed in gnupg master, and debian backports the included patches
for 2.1.18.
See also:
https://bugs.gnupg.org/gnupg/issue2933
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=852702
https://github.com/NixOS/nixpkgs/pull/21991
2017-02-20 04:30:01 +01:00