Using types.str doesn't work if you want to mkBefore/mkAfter across
different module definitions, because it only allows for one definition
for the same priority.
This is especially useful if you deploy Hetzner machines via NixOps,
because the physical specification already defines localCommands.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This commit removes all references to emacs24 with the exception of
emacs24-macports. The two folders in `pkgs/applications/editors` named
`emacs-24` and `emacs-24` are consolidated to a new `emacs` folder.
Various parts in nixpkgs also referenced `emacs24Packages` (pinned to
`emacs24`) explicitly where `emacsPackages` (non-pinned) is more
appropriate. These references get fixed by this commit too.
It looks like the cpu type part of modalias might have changed, my
systems (4.4.20 and 4.7.2) show something like the following:
```
cpu:type:x86,ven0000fam0006mod003F:feature:,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0010,0011,0013,0017,0018,0019,001A,001C,002B,0034,003B,003D,0068,006F,0070,0072,0074,0075,0076,007D,0080,0081,0089,008C,008D,0091,0093,0094,0095,0096,0097,0098,0099,009A,009B,009C,009D,009E,009F,00C0,00C5,0120,0123,0125,0127,0128,0129,012A,0140
```
Update the rngd modalias rule to match this so udev properly has
systemd start rngd.
This reverts commit 1010271c63.
This reverts commit e85e51d41f.
The first commit causes multiple regressions. The second commit tries to
fix the regressions, but does not catch all of them. There are multiple
failing tests, one of which is blocking a package update. That is not
acceptable for a cosmetic patch.
* influxdb module: add postStart
* cadvisor module: increase TimeoutStartSec
Under high load, the cadvisor module can take longer than the default 90
seconds to start. This change should hopefully fix the test on Hydra.
Regression introduced by bccd75094f.
The mentioned commit removed the pkgs.gtk attribute, but forgot to
change this within the xfce module.
Tested using the xfce NixOS test and it has passed on my machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Regression introduced by 1010271c63.
This caused the line after using the loginuid module to be concatenated
with the next line without a newline.
In turn this has caused a lot of the NixOS VM tests to either run very
slowly (because of constantly hitting PAM errors) or simply fail.
I have tested this only with one of the failing NixOS tests.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
While entering the chroot should provide the same amount of isolation,
the preStart script will run with full root privileges and so would
benefit from some isolation as well (in particular due to
unbound-anchor, which can perform network I/O).
1. The preStart script ensures consistent ownership, even if the unbound
user's uid has changed
2. The unbound daemon does not generate data that needs to be private to
it, so it would not matter that a different service would end up
owning its data (as long as unbound remains enabled, it should reclaim
ownership soon enough anyway).
Thus, there's no clear benefit to allocate a dedicated uid for the
unbound service. This releases uid/gid 48.
Also, because the preStart script creates the data directory, there's no
need to specify a homedir or ask for its creation.
/dev/random is an exhaustible resource. Presumably, unbound will not be
used to generate long-term encryption keys and so allowing it to use
/dev/random only increases the risk of entropy exhaustion for no
benefit.
The generated files in /etc/pam.d/ typically have a lot of empty lines
in them, due to how the generated Nix strings are joined together;
optional elements that are excluded still produce a newline. This patch
changes how the files are generated to create more compact,
human-friendly output files.
The change is basically this, repeated:
- ''
- ${optionalString use_ldap
- "account sufficient ${pam_ldap}/lib/security/pam_ldap.so"}
- ''
+ optionalString use_ldap ''
+ account sufficient ${pam_ldap}/lib/security/pam_ldap.so
+ ''
This introduces VirtualBox version 5.1.6 along with a few refactored
stuff, notably:
* Kernel modules and user space applications are now separate
derivations.
* If config.pulseaudio doesn't exist in nixpkgs config, the default is
now to build with PulseAudio modules.
* A new updater to keep VirtualBox up to date.
All subtests in nixos/tests/virtualbox.nix succeed on my machine and
VirtualBox was reported to be working by @DamienCassou (although with
unrelated audio problems for another fix/branch) and @calbrecht.
- logDriver option, use journald for logging by default
- keep storage driver intact by default, as docker has sane defaults
- do not choose storage driver in tests, docker will choose by itself
- use dockerd binary as "docker daemon" command is deprecated and will be
removed
- add overlay2 to list of storage drivers
VirtualBox user space binaries now no longer reside in linuxPackages, so
let's use the package for the real user space binaries instead.
Tested using the following command:
nix-build nixos/release.nix -A ova.x86_64-linux
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Switches from the forking service type to simple by running haveged in
the foreground. Also restricts the execution environment a bit (these
are inspired by the Debian service file).
Putting the kernel modules into the same output path as the main
VirtualBox derivation causes all of VirtualBox to be rebuilt on every
single kernel update.
The build process of VirtualBox already outputs the kernel module source
along with the generated files for the configuration of the main
VirtualBox package. We put this into a different output called "modsrc"
which we re-use from linuxPackages.virtualbox, which is now only
containing the resulting kernel modules without the main user space
implementation.
This not only has the advantage of decluttering the Nix expression for
the user space portions but also gets rid of the need to nuke references
and the need to patch out "depmod -a".
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
See #18319 for details. Starting network-online.target manually does not
work as it hangs indefinitely.
Additionally, don't treat avahi and dhcpcd special and sync their systemd units
with the respective upstream suggestion.
The extraOptions option has default values which seems surprising. This
moves those values to startupOptions (which is what gocd-agent uses) and
empties out the default extraOptions.
The gocd-agent startupOptions description was also changed to remove the
mention of the example (given there isn't one).
Systemd upstream provides targets for networking. This also includes a target network-online.target.
In this PR I remove / replace most occurrences since some of them were even wrong and could delay startup.
Radicale can run as a foreground service and will then emits logging and
errors on the standard output. This helps the logging end up in the
systemd journal.
This partially reverts commit ab9537ca22.
From the manpage of systemd-nspawn(1):
Note that systemd-nspawn will mount file systems private to the
container to /dev, /run and similar.
Testing this in a shell turns out:
$ sudo systemd-nspawn --bind-ro=/nix/store "$(readlink "$(which ls)")" /proc
Spawning container aszlig on /home/aszlig.
Press ^] three times within 1s to kill container.
/etc/localtime does not point into /usr/share/zoneinfo/, not updating
container timezone.
1 execdomains kpageflags stat
acpi fb loadavg swaps
asound filesystems locks sys
buddyinfo fs meminfo sysrq-trigger
bus interrupts misc sysvipc
cgroups iomem modules thread-self
cmdline ioports mounts timer_list
config.gz irq mtrr timer_stats
consoles kallsyms net tty
cpuinfo kcore pagetypeinfo uptime
crypto key-users partitions version
devices keys scsi vmallocinfo
diskstats kmsg self vmstat
dma kpagecgroup slabinfo zoneinfo
driver kpagecount softirqs
Container aszlig exited successfully.
So the test on whether PID 1 exists in /proc is enough, because if we
use PID namespaces there actually _is_ a PID 1 (as shown above) and the
special file systems are already mounted. A test on the $containers
variable actually mounts them twice.
This unbreaks NixOS containers and I've tested this against the
containers-imperative NixOS test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @rickynils, @shlevy, @edolstra
Follow-up to the following commits:
abdc5961c3cdf9f5893ea1e91ba08ff5089f53a4: Fix starting the firewall
e090701e2d09aec3e8866ab9a8e53c37973ffeb4: Order before sysinit
Solely use sysinit.target here instead of multi-user.target because we
want to make sure that the iptables rules are applied *before* any
socket units are started.
The reason I've dropped the wantedBy on multi-user.target is that
sysinit.target is already a part of the dependency chain of
multi-user.target.
To make sure that this holds true, I've added a small test case to
ensure that during switch of the configuration the firewall.service is
considered as well.
Tested using the firewall NixOS test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Probably as a result of 992c514a20, it
was not being started anymore.
My understanding of systemd.special(7) (section "Special passive
system units") is that the firewall should want network-pre.target,
rather than the other way around (not very intuitive...). This in
itself does not cause the firewall to be wanted, which is why the
wanted-by relationship with multi-user.target is necessary.
http://hydra.nixos.org/build/39965589
This partially reverts commit 0aa7520670.
Fine for rsync to be in system path but we still need the explicit path
in nixos-install in case it is invoked from non-NixOS systems and also
to fix OVA test failure
See also 0aa7520670
cc @edolstra
We were pulling in 44 MiB of fonts in the default configuration, which
is a bit excessive for headless configurations like EC2
instances. Note that dejavu_minimal ensures that remote X11-forwarded
applications still have a basic font regardless.
It appears that packageOverrides no longer overrides aliases, so
aliases like
dbus_tools = self.dbus.out;
dbus_daemon = self.dbus.daemon;
now use the old, non-overriden version of dbus. That seems like a
pretty serious regression in general, but for this particular problem,
I've fixed it by replacing dbus_daemon by dbus.daemon and dbus_tools
by dbus.
This reverts commit 582313bafe.
Removing rsync is actually pointless because nixos-install depends on
it. So if it's part of the system closure, we may as well provide it
to users.
Probably with the next Nix release we can drop the use of rsync and
use "nix copy" instead.
This one was already merged into release-16.09, so let's not have the
stable branch is ahead of master and confuse things. In addition to
that, currently we have an odd situation that master has less things
actually finished building than in staging.
Conflicts:
pkgs/data/documentation/man-pages/default.nix
Fixes#15512 and #16032
With the multi output, postgresql cannot find at runtime what is its
basedir when looking for libdir and pkglibdir. This commit fixes that.
Before this commit updating /var/setuid-wrappers/ folder introduced
a small window where NixOS activation scripts could be terminated
and resulted into empty /var/setuid-wrappers/ folder.
That's very unfortunate because one might lose sudo binary.
Instead we use two atomic operations mv and ln (as described in
https://axialcorps.com/2013/07/03/atomically-replacing-files-and-directories/)
to achieve atomicity.
Since /var/setuid-wrappers is not a directory anymore, tmpfs mountpoints
were removed in installation scripts and in boot process.
Tested:
- upgrade /var/setuid-wrappers/ from folder to a symlink
- make sure /run/setuid-wrappers-dirs/ legacy symlink is really deleted
Add code to accountsservice that returns an error if the environment
variable NIXOS_USERS_PURE is set. This variable is set from the nixos
accountsservice module if mutableUsers = false
Both btrfs-progs and utillinux are ~5MB, we may discuss in future
to handle this better but I see no better way at the moment than
increaing purity in the install process.
OnCalendar entrys can be specified multiple times in a systemd timer, to
make more complex scheduling possible.
Tested by manually checking the timer generated by the following:
systemd = {
services.huhu = {
description = "meh";
wantedBy = [ "default.target" ];
serviceConfig.ExecStart = "/bin/sh -c 'printf HUHU!'";
startAt = [ "*:*:0/30" "*:0/1:15" ];
};
};
It prints HUHU to the log at seconds 0, 15 and 30 of each minute.
This was one of the ways to build packages, we are trying
hard to minimize different ways so it's easier for newcomers
to learn only one way.
This also:
- removes texLive (old), fixes#14807
- removed upstream-updater, if that code is still used it should be in
separate repo
- changes a few packages like gitit/mit-scheme to use new texlive
Verified that following nixos configuration:
users.users.foo = {
uid = 1000;
name = "foo";
};
users.users.bar = {
name = "bar";
};
Before this commit both users will get uid of 1000, after it's applied
bar will correctly get 1001.
