nixpkgs/nixos/tests/ceph-single-node-bluestore-dmcrypt.nix

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

274 lines
11 KiB
Nix
Raw Normal View History

import ./make-test-python.nix (
{ pkgs, lib, ... }:
let
# the single node ipv6 address
ip = "2001:db8:ffff::";
# the global ceph cluster id
cluster = "54465b37-b9d8-4539-a1f9-dd33c75ee45a";
# the fsids of OSDs
osd-fsid-map = {
"0" = "1c1b7ea9-06bf-4d30-9a01-37ac3a0254aa";
"1" = "bd5a6f49-69d5-428c-ac25-a99f0c44375c";
"2" = "c90de6c7-86c6-41da-9694-e794096dfc5c";
};
in
{
name = "basic-single-node-ceph-cluster-bluestore-dmcrypt";
meta = {
maintainers = with lib.maintainers; [
benaryorg
nh2
];
};
nodes = {
ceph =
{ pkgs, config, ... }:
{
# disks for bluestore
virtualisation.emptyDiskImages = [
20480
20480
20480
];
# networking setup (no external connectivity required, only local IPv6)
networking.useDHCP = false;
systemd.network = {
enable = true;
wait-online.extraArgs = [
"-i"
"lo"
];
networks = {
"40-loopback" = {
enable = true;
name = "lo";
DHCP = "no";
addresses = [ { Address = "${ip}/128"; } ];
};
};
};
# do not start the ceph target by default so we can format the disks first
systemd.targets.ceph.wantedBy = lib.mkForce [ ];
# add the packages to systemPackages so the testscript doesn't run into any unexpected issues
# this shouldn't be required on production systems which have their required packages in the unit paths only
# but it helps in case one needs to actually run the tooling anyway
environment.systemPackages = with pkgs; [
ceph
cryptsetup
lvm2
];
services.ceph = {
enable = true;
client.enable = true;
extraConfig = {
public_addr = ip;
cluster_addr = ip;
# ipv6
ms_bind_ipv4 = "false";
ms_bind_ipv6 = "true";
# msgr2 settings
ms_cluster_mode = "secure";
ms_service_mode = "secure";
ms_client_mode = "secure";
ms_mon_cluster_mode = "secure";
ms_mon_service_mode = "secure";
ms_mon_client_mode = "secure";
# less default modules, cuts down on memory and startup time in the tests
mgr_initial_modules = "";
# distribute by OSD, not by host, as per https://docs.ceph.com/en/reef/cephadm/install/#single-host
osd_crush_chooseleaf_type = "0";
};
client.extraConfig."mon.0" = {
host = "ceph";
mon_addr = "v2:[${ip}]:3300";
public_addr = "v2:[${ip}]:3300";
};
global = {
fsid = cluster;
clusterNetwork = "${ip}/64";
publicNetwork = "${ip}/64";
monInitialMembers = "0";
};
mon = {
enable = true;
daemons = [ "0" ];
};
osd = {
enable = true;
daemons = builtins.attrNames osd-fsid-map;
};
mgr = {
enable = true;
daemons = [ "ceph" ];
};
};
systemd.services =
let
osd-name = id: "ceph-osd-${id}";
osd-pre-start = id: [
"!${config.services.ceph.osd.package.out}/bin/ceph-volume lvm activate --bluestore ${id} ${osd-fsid-map.${id}} --no-systemd"
"${config.services.ceph.osd.package.lib}/libexec/ceph/ceph-osd-prestart.sh --id ${id} --cluster ${config.services.ceph.global.clusterName}"
];
osd-post-stop = id: [
"!${config.services.ceph.osd.package.out}/bin/ceph-volume lvm deactivate ${id}"
];
map-osd = id: {
name = osd-name id;
value = {
serviceConfig.ExecStartPre = lib.mkForce (osd-pre-start id);
serviceConfig.ExecStopPost = osd-post-stop id;
unitConfig.ConditionPathExists = lib.mkForce [ ];
unitConfig.StartLimitBurst = lib.mkForce 4;
path = with pkgs; [
util-linux
lvm2
cryptsetup
];
};
};
in
lib.pipe config.services.ceph.osd.daemons [
(builtins.map map-osd)
builtins.listToAttrs
];
};
};
testScript =
{ ... }:
''
start_all()
ceph.wait_for_unit("default.target")
# Bootstrap ceph-mon daemon
ceph.succeed(
"mkdir -p /var/lib/ceph/bootstrap-osd",
"ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *'",
"ceph-authtool --create-keyring /etc/ceph/ceph.client.admin.keyring --gen-key -n client.admin --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow *' --cap mgr 'allow *'",
"ceph-authtool --create-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring --gen-key -n client.bootstrap-osd --cap mon 'profile bootstrap-osd' --cap mgr 'allow r'",
"ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/ceph.client.admin.keyring",
"ceph-authtool /tmp/ceph.mon.keyring --import-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring",
"monmaptool --create --fsid ${cluster} --addv 0 'v2:[${ip}]:3300/0' --clobber /tmp/ceph.initial-monmap",
"mkdir -p /var/lib/ceph/mon/ceph-0",
"ceph-mon --mkfs -i 0 --monmap /tmp/ceph.initial-monmap --keyring /tmp/ceph.mon.keyring",
"chown ceph:ceph -R /tmp/ceph.mon.keyring /var/lib/ceph",
"systemctl start ceph-mon-0.service",
)
ceph.wait_for_unit("ceph-mon-0.service")
# should the mon not start or bind for some reason this gives us a better error message than the config commands running into a timeout
ceph.wait_for_open_port(3300, "${ip}")
ceph.succeed(
# required for HEALTH_OK
"ceph config set mon auth_allow_insecure_global_id_reclaim false",
# IPv6
"ceph config set global ms_bind_ipv4 false",
"ceph config set global ms_bind_ipv6 true",
# the new (secure) protocol
"ceph config set global ms_bind_msgr1 false",
"ceph config set global ms_bind_msgr2 true",
# just a small little thing
"ceph config set mon mon_compact_on_start true",
)
# Can't check ceph status until a mon is up
ceph.succeed("ceph -s | grep 'mon: 1 daemons'")
# Bootstrap OSDs (do this before starting the mgr because cryptsetup and the mgr both eat a lot of memory)
ceph.succeed(
# this will automatically do what's required for LVM, cryptsetup, and stores all the data in Ceph's internal databases
"ceph-volume lvm prepare --bluestore --data /dev/vdb --dmcrypt --no-systemd --osd-id 0 --osd-fsid ${osd-fsid-map."0"}",
"ceph-volume lvm prepare --bluestore --data /dev/vdc --dmcrypt --no-systemd --osd-id 1 --osd-fsid ${osd-fsid-map."1"}",
"ceph-volume lvm prepare --bluestore --data /dev/vdd --dmcrypt --no-systemd --osd-id 2 --osd-fsid ${osd-fsid-map."2"}",
"sudo ceph-volume lvm deactivate 0",
"sudo ceph-volume lvm deactivate 1",
"sudo ceph-volume lvm deactivate 2",
"chown -R ceph:ceph /var/lib/ceph",
)
# Start OSDs (again, argon2id eats memory, so this happens before starting the mgr)
ceph.succeed(
"systemctl start ceph-osd-0.service",
"systemctl start ceph-osd-1.service",
"systemctl start ceph-osd-2.service",
)
ceph.wait_until_succeeds("ceph -s | grep 'quorum 0'")
ceph.wait_until_succeeds("ceph osd stat | grep -e '3 osds: 3 up[^,]*, 3 in'")
# Start the ceph-mgr daemon, after copying in the keyring
ceph.succeed(
"mkdir -p /var/lib/ceph/mgr/ceph-ceph/",
"ceph auth get-or-create -o /var/lib/ceph/mgr/ceph-ceph/keyring mgr.ceph mon 'allow profile mgr' osd 'allow *' mds 'allow *'",
"chown -R ceph:ceph /var/lib/ceph/mgr/ceph-ceph/",
"systemctl start ceph-mgr-ceph.service",
)
ceph.wait_for_unit("ceph-mgr-ceph")
ceph.wait_until_succeeds("ceph -s | grep 'quorum 0'")
ceph.wait_until_succeeds("ceph -s | grep 'mgr: ceph(active,'")
ceph.wait_until_succeeds("ceph osd stat | grep -e '3 osds: 3 up[^,]*, 3 in'")
ceph.wait_until_succeeds("ceph -s | grep 'HEALTH_OK'")
# test the actual storage
ceph.succeed(
"ceph osd pool create single-node-test 32 32",
"ceph osd pool ls | grep 'single-node-test'",
# We need to enable an application on the pool, otherwise it will
# stay unhealthy in state POOL_APP_NOT_ENABLED.
# Creating a CephFS would do this automatically, but we haven't done that here.
# See: https://docs.ceph.com/en/reef/rados/operations/pools/#associating-a-pool-with-an-application
# We use the custom application name "nixos-test" for this.
"ceph osd pool application enable single-node-test nixos-test",
"ceph osd pool rename single-node-test single-node-other-test",
"ceph osd pool ls | grep 'single-node-other-test'",
)
ceph.wait_until_succeeds("ceph -s | grep '2 pools, 33 pgs'")
ceph.wait_until_succeeds("ceph -s | grep 'HEALTH_OK'")
ceph.wait_until_succeeds("ceph -s | grep '33 active+clean'")
ceph.fail(
# the old pool should be gone
"ceph osd pool ls | grep 'multi-node-test'",
# deleting the pool should fail without setting mon_allow_pool_delete
"ceph osd pool delete single-node-other-test single-node-other-test --yes-i-really-really-mean-it",
)
# rebooting gets rid of any potential tmpfs mounts or device-mapper devices
ceph.shutdown()
ceph.start()
ceph.wait_for_unit("default.target")
# Start it up (again OSDs first due to memory constraints of cryptsetup and mgr)
ceph.systemctl("start ceph-mon-0.service")
ceph.wait_for_unit("ceph-mon-0")
ceph.systemctl("start ceph-osd-0.service")
ceph.wait_for_unit("ceph-osd-0")
ceph.systemctl("start ceph-osd-1.service")
ceph.wait_for_unit("ceph-osd-1")
ceph.systemctl("start ceph-osd-2.service")
ceph.wait_for_unit("ceph-osd-2")
ceph.systemctl("start ceph-mgr-ceph.service")
ceph.wait_for_unit("ceph-mgr-ceph")
# Ensure the cluster comes back up again
ceph.succeed("ceph -s | grep 'mon: 1 daemons'")
ceph.wait_until_succeeds("ceph -s | grep 'quorum 0'")
ceph.wait_until_succeeds("ceph osd stat | grep -E '3 osds: 3 up[^,]*, 3 in'")
ceph.wait_until_succeeds("ceph -s | grep 'mgr: ceph(active,'")
ceph.wait_until_succeeds("ceph -s | grep 'HEALTH_OK'")
'';
}
)