Removes trailing whitespace from goal_src files, eventually the
formatter will do this as well but it's not ready yet so this is a
decent interim solution.
A competent text editor will also do this / flag it for you.
Added a new `rip_collision` flag to the decompiler config and wired it
up. Cleaned up the comments around these fields in the JSON too for
clarity
Also refactored a bunch of the related extract functions to read from
`config` object rather than pass down a bunch of booleans
This sets out the bones of a Jak 3 build, many things are stubbed out,
guessed, or copied from Jak 2 but it should at least be good enough to:
run `task set-game-jak3`
launch the repl
run builds from the repl
build outputs themselves are untested but the build itself runs without
errors
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
My mistake -- testing focused too much on preserving the existing
behaviour I clearly forgot to make sure the new stuff worked properly.
Just had to early out and not modify the args if they were in the new
format.
An attempt to cleanup the last CLI interface we have left to cleanup.
- `gk` args now follow the typical convention ie. `--proj-path` instead
of `-proj-path`.
- args that are passed through to the rest of the application / the
game's runtime use the typical convention of following a `--`
- I'm thinking some args shouldn't be handled at this level ie
(`-nodisplay`, `-vm`, `-novm` or `-jak2`) These could be better
documented as legitimate flags and passed in via a nice struct. They
don't seem to be used in `InitParams` but I'll triple check.
There's a temporary shim here so there is no coupled release with the
launcher (right now it executes `gk` with a few args). So I just change
the old args into the new format. After one release cycle, I can change
it in the launcher and delete it here.
I am unsure if this will break the bash shellscript usages -- not sure
which args were usually passed into `$@`
![image](https://user-images.githubusercontent.com/13153231/222035309-b6601719-cdc9-40ee-b36e-e4b135d3f128.png)
Reasons for doing so include:
1. This should stop the confusion around editing the wrong config file's
flags -- when for example, extracting a level. Common settings can be in
one central place, with bespoke overrides being provided for each
version
2. Less verbose way of supporting multiple game versions. You don't have
to duplicate the entire `type_casts` file for example, just add or
override the json objects required.
3. Makes the folder structure consistent, Jak 1's `all-types` is now in
a `jak1` folder, etc.
- lets you split up your `startup.gc` file into two sections
- one that runs on initial startup / reloads
- the other that runs when you listen to a target
- allows for customization of the keybinds added a month or so ago
- removes a useless flag (--startup-cmd) and marks others for
deprecation.
- added another help prompt that lists all the keybinds and what they do
Co-authored-by: water <awaterford111445@gmail.com>
Two main problems fixed here:
- offline tests will fail on a comparison failure (a mistake from the
re-write)
- art-group-info is committed to the repo and shared with every thread
(running the tests with 1 thread, for example on the CI, and locally
were producing different results)
art files are still not provided to the jak2 offline tests:
- `*-ag` files are not being output
- `art-elts.gc` is not complete, as a handful of files claim to be
missing stuff
lastly, in jak1's offline tests we were also running `tpage` and `*-vis`
files through the decompiler. This omits that (they came from the
`all_objs.json` file) -- is this an issue?
A big one...
I figure even if we would like to change the way the particle/scene code
is output -- it'd be easier to find patterns with it all decompiled.
I've updated my script so it can easily be used to mass update these
files:
```bash
task update-gsrc-glob GLOB="**/*-part*.gc"
```
> for example will update gsrc files with `part` in their name -- if
they are in ref tests (so uncompleted ones aren't touched)
I found a few issues along the way that I'll have to make issues for
soon.
This solves two main problems:
- the looming threat of running out of memory since every thread would
consume duplicate (and probably not needed) resources
- though I will point out, jak 2's offline tests seem to hardly use any
memory even with 400+ files, duplicated across many threads. Where as
jak 1 does indeed use tons more memory. So I think there is something
going on besides just the source files
- condense the output so it's much easier to see what is happening / how
close the test is to completing.
- one annoying thing about the multiple thread change was errors were
typically buried far in the middle of the output, this fixes that
- refactors the offline test code in general to be a lot more modular
The pretty printing is not enabled by default, run with `-p` or
`--pretty-print` if you want to use it
https://user-images.githubusercontent.com/13153231/205513212-a65c20d4-ce36-44f6-826a-cd475505dbf9.mp4
- You can define a `startup.gc` in your user folder, each line will be
executed on startup (deprecates the usefulness of some cli flags)
- You can define a `repl-config.json` file to override REPL settings.
Long-term this is a better approach than a bunch of CLI flags as well
- Via this, you can override the amount of time the repl will attempt to
listen for the target
- At the same time, I think i may have found why on Windows it can
sometimes take forever to timeout when the game dies, will dig into this
later
- Added some keybinds for common operations, shown here
https://user-images.githubusercontent.com/13153231/202890278-1ff2bb06-dddf-4bde-9178-aa0883799167.mp4
> builds the game, connects to it, attaches a debugger and continues,
launches it, gets the backtrace, stops the target -- all with only
keybinds.
If you want these keybinds to work inside VSCode's integrated terminal,
you need to add the following to your settings file
```json
"terminal.integrated.commandsToSkipShell": [
"-workbench.action.quickOpen",
"-workbench.action.quickOpenView"
]
```
Couldn't finish any of the enemy/nav-enemy related files for one reason
or another, but quite a bit of work that will be easier to merge and
iterate on instead of keeping track of the branch.
enemy/idle-control has some very weird focus related code.
nav-mesh/nav-control still has a bunch of CFG resolution problems that
need to be manually resolved.
Co-authored-by: water <awaterford111445@gmail.com>
The offline-tests are going to end up taking too long for jak 2, I did
some rough math and by the end of it we'll be spending almost 2 minutes
for a full offline test on my machine.
These changes allow us to throw hardware at the problem
Still some work to do to make the output nicer, but seems to be fairly
reliable. By default it still uses 1 thread, use `num_threads` to change
this.
This PR does a few main things:
- finish decompiling the progress related code
- implemented changes necessary to load the text files end-to-end
- japanese/korean character encodings were not added
- finish more camera code, which is required to spawn the progress menu
/ init the default language settings needed for text
- initialized the camera as well
Still havn't opened the menu as there are a lot of checks around
`*target*` which I havn't yet gone through and attempted to comment out.
A small quality of life increase that is more impactful since jak 2 has
double the file count.
I often use the offline-tests to find compiler errors / automatically
resolve them when i am finalizing a file. As more and more files are
completed this becomes increasingly more inefficient. When I know that
only 1 file needs to be decompiled / compared / compiled, I'd prefer to
have a feature like this.
* scripts: remove references to non-existent script
* game: fix transition from fullscreen (not borderless) to windowed
* game: ensure window is position away from the corner of the display when switching from fullscreen
* scripts: cleanup scripts directory some more
* stash, getting there
* stash again
* closer!
* it works! decently....cleanup time and add some extra features
* minor cleanup
* all-types: improve all-types generation
* all-types: re-generate all-types
* tests: remove the test reporting feature
the format indeed doesn't work, and all current actions require too many permissions for forked PRs.
I'll make my own eventually that works properly (use the new markdown feature)
* all-types: put the states in the method table instead
* all-types: replace all `*time*...uint64` fields with `time-frame` type
* all-types: address feedback
* git: ignore vs build dir
* cmake: ditch `clang-cl` on windows in favor of actual `clang`
* build: suppress a significant number of warnings
* build: adjust workflows and vendor nasm
* docs: update docs to remove `clang-cl` mentions
* tests: move jak1 reference tests into their own folder
* tests: update offline tests to support multiple games
* tests: some additional fixes and multi-game handling
* tests: update reference tests